91133209102 Kenmore Cooktop - Overview
Sections of the 91133209102
[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
Range Grate Foot
PartSelect #: PS2353327
Manufacturer #: WB02T10461
The Grate Foot is a black rubber part which attaches underneath the grate in order to protect your stovetop from being scratched, which it does by cushioning the grate on your gas range. If this part ...
$13.95
In Stock
Range Spark Igniter
PartSelect #: PS11736298
Manufacturer #: WB13X27058
Also known as spark electrode. This part helps your burner ignite and produce flame.
$58.36
In Stock
Range Top Electrode Mounting Clip
PartSelect #: PS3510420
Manufacturer #: WB01K10112
This Genuine OEM GE Electrode Clip is a precision-engineered component designed for use across a wide range of gas ranges. Constructed from durable metal, the clip plays a critical role in securing th...
$16.95
In Stock
Screw
PartSelect #: PS271689
Manufacturer #: WH2X930
This screw is sold individually.
$13.95
In Stock
Spark Igniter Switch and Harness Assembly
PartSelect #: PS953094
Manufacturer #: WB18T10339
This part is the spark igniter switch and harness assembly for your gas range. This harness assembly has 4 igniter switches already wired into it. It includes the igniter switches and the complete wir...
No Longer Available
Gas Pressure Regulator
PartSelect #: PS2337785
Manufacturer #: WB19T10078
This comes set from the manufacturer for Natural Gas. It also includes the conversion to Liquid Propane.
This valve automatically cuts off the flow of gas at a certain pressure.
$49.95
In Stock
Range Seal Cntl (Black)
PartSelect #: PS952314
Manufacturer #: WB04T10042
This is a GE-branded Control Panel Seal designed for cooktops. This central black seal serves a crucial role in preventing spillage from leaking beneath the control panel. Before installing this part,...
$20.95
In Stock
Manuals & Care Guides for 91133209102
Click to downloadQuestions And Answers for 91133209102
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 91133209102
[Viewing 3 of 3]Will Not Start
Fixed by
these parts
these parts
Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Burner wouldn't light
I removed the old igniter by working a thin screwdriver under the edge of the igniter, and carefully prying it up. I then used pliers to pull off the electrical wire. Connected up the new igniter, and pushed it back into the hole. A very simple repair.
I've replaced 2 igniters on this stove. My symptoms were that when I tried ... Read more to light one of the bad burners I heard clicking, and could see the spark on the other (working) burners. So I knew the basic sparking function was working. Just that the igniter on the broken burner would not spark.
I've replaced 2 igniters on this stove. My symptoms were that when I tried ... Read more to light one of the bad burners I heard clicking, and could see the spark on the other (working) burners. So I knew the basic sparking function was working. Just that the igniter on the broken burner would not spark.
Read less
Parts Used:
-
Jeffrey from Freehold, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
52 of 62 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No click or ignition after turning on burner - had to replace Ignitor Switch assembly
Do not remove the gas line.
Take off the burner racks and burner covers
Gently extract/remove the ignitors from each burner. You may have to use pliers, but be careful. They are ceramic.
Once you pull out the ignitors, you can remove the ignitors from their wires using plyers, you may have to twist them a ... Read more little.
To take off the top - use Star screw drivers to remove the burners
Remove all the burners.
The star screws, and the burners are the only thing holding the top on.
Take off the steel top.
That exposes the ignitor switch assembly.
Make sure you follow the positioning diagram that comes with the new part.
Thats it really.
I removed the gas, because I thought I had to, but you don't need to. You can do the whole job in 30 minutes if you are careful.
Hope it helps.
You'll have to
Take off the burner racks and burner covers
Gently extract/remove the ignitors from each burner. You may have to use pliers, but be careful. They are ceramic.
Once you pull out the ignitors, you can remove the ignitors from their wires using plyers, you may have to twist them a ... Read more little.
To take off the top - use Star screw drivers to remove the burners
Remove all the burners.
The star screws, and the burners are the only thing holding the top on.
Take off the steel top.
That exposes the ignitor switch assembly.
Make sure you follow the positioning diagram that comes with the new part.
Thats it really.
I removed the gas, because I thought I had to, but you don't need to. You can do the whole job in 30 minutes if you are careful.
Hope it helps.
You'll have to
Read less
Parts Used:
-
Ken from Stony Brook, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
21 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Grate Foot had worn out
A rubber grate foot on my range top had worn out. I pulled the worn foot out and installed the new grate foot with no tools or accessories. Good as new! Now I don't have to worry about the grate scraping my range top and scratching the paint. I also ordered extras so I won't have to wait if another wears out.
Parts Used:
-
Kathryn from Star City, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
24 of 33 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!