Back
Back
Keep typing for more specific results...

9114338680 Kenmore Cooktop - Overview

Sections of the 9114338680

[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
Range Drip Bowl 6 – Part Number: WB32X107
Range Drip Bowl 6
★★★★★
★★★★★
(27)
PartSelect #: PS244697
Manufacturer #: WB32X107
The drip bowl on your range is designed to catch any spills that may occur when cooking. This drip bowl is chrome in color and is 6 inches in diameter. The chrome drip bowl is intended for use with ro...
$19.95
  In Stock
Order within the next 7 hrs and your part ships today!
Range Drip Bowl 8 – Part Number: WB32X106
Range Drip Bowl 8
★★★★★
★★★★★
(15)
PartSelect #: PS244696
Manufacturer #: WB32X106
Drip bowls are located under the heating elements and catch grease and spills that come from cooking on your stove top. If your drip bowl is damaged or rusted, it could allow grease to drip inside you...
$23.95
  In Stock
Order within the next 7 hrs and your part ships today!
Surface Element Switch – Part Number: W10900107
Surface Element Switch
★★★★★
★★★★★
(3)
PartSelect #: PS12070192
Manufacturer #: W10900107
A surface element switch, also known as a burner/infinite switch, is a device used to control and regulate the heat output of the burners on a stovetop or cooktop. This switch is controlled with a kno...
$46.18
  In Stock
Order within the next 7 hrs and your part ships today!
8 Inch Burner – Part Number: WB30X253
8 Inch Burner
★★★★★
★★★★★
(6)
PartSelect #: PS244014
Manufacturer #: WB30X253
This part is the replacement surface burner or element for your range. It is approximately 8 inches in diameter, and 2100 watts. The surface burner connects to the power source and when it is turned o...
$55.39
  In Stock
Order within the next 7 hrs and your part ships today!
Range Burner Terminal Block Kit – Part Number: WB17X210
Range Burner Terminal Block Kit
★★★★★
★★★★★
(7)
PartSelect #: PS232606
Manufacturer #: WB17X210
This is a surface burner terminal block kit, also known as range surface element receptacle, for an oven, range, or stove. The kit comes with the terminal block, mounting clip, and wires. This surface...
$66.28
  In Stock
Order within the next 7 hrs and your part ships today!
Ignitor Mounting Screw – Part Number: WB1X1293
Ignitor Mounting Screw
★★★★★
★★★★★
(2)
PartSelect #: PS234519
Manufacturer #: WB1X1293
Sold Individually.
$13.95
  In Stock
Order within the next 7 hrs and your part ships today!
Range Rolled Terminal Surface Unit 6 1250w – Part Number: WB30X254
Range Rolled Terminal Surface Unit 6 1250w
★★★★★
★★★★★
(1)
PartSelect #: PS244015
Manufacturer #: WB30X254
Introducing the GE Appliances Coil Surface Element, expertly designed to supply heat to a cooking area on top of your electric range. With a diameter of 6 inches, this rolled terminal surface unit is ...
$57.37
  In Stock
Order within the next 7 hrs and your part ships today!
Range Screw – Part Number: WB1M1
Range Screw
★★★★★
★★★★★
(1)
PartSelect #: PS234320
Manufacturer #: WB1M1
Sold Individually.
$12.95
  In Stock
Order within the next 7 hrs and your part ships today!
Screw – Part Number: WB1X1130
Screw
★★★★★
★★★★★
(2)
PartSelect #: PS234427
Manufacturer #: WB1X1130
Sold Individually.
$13.95
  In Stock
Order within the next 7 hrs and your part ships today!
Element Disc – Part Number: WB30X260
Element Disc
★★★★★
★★★★★
(3)
PartSelect #: PS244021
Manufacturer #: WB30X260
This is an element disk but may also be known as a surface element and it is a part for your range. The function of this disk is to give heat to the cooking area on top of the range. This disk is for ...
  No Longer Available
Element Center Medallion – Part Number: WB31X5021
Element Center Medallion
PartSelect #: PS244486
Manufacturer #: WB31X5021
This medallion is located in the middle of the surface burner.
$13.95
  Special Order
Range Surface Element – Part Number: WB30X261
Range Surface Element
PartSelect #: PS244022
Manufacturer #: WB30X261
  No Longer Available

Questions And Answers for 9114338680

Be the first to ask our experts a question about this model!

Common Symptoms of the 9114338680

[Viewing 3 of 3]
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Little to no heat when baking
Fixed by
these parts
Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
There was no heat on the coils.
I opened the lid, and found that the terminal blocks were burnt, the wires were melted. I ordered one set of terminal block to replace the burnt one, and it worked. Before I started, I shut off the electricity in the whole house to be safe.
Parts Used:
Range Burner Terminal Block Kit
  • Shaohui from East Lansing, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
48 of 52 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner would not heat
First i shut off the power since this is an electric cook top/range. I then removed the knob and the two screws that hold the burner switch in place. I removed the wires one at a time and connected each to the new switch. I then reattached the screws to the switch. The most difficult part to me was breaking off the switch stem at the right level. I got that done and finally selected the appropriate adapter for the stem/knob fit.
Parts Used:
Surface Element Switch
  • Edward from Malvern, AR
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
27 of 35 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Surface burner coil did not work.
TURN OFF ALL POWER TO KITCHEN. Took off all burner coils and plates below them. Lift hood. Locate part. Remove old part and replace with new part in same way as was previously installed. The wire that comes with the kit is actually too much wire, but just arrange it the best you can and leave it....no big deal. I didn't have a magnet, but needed one. The wire from burner coil to switch runs through a harness which is screwed on to the body of the oven (below the range). Be careful NOT to drop it behind oven when taking it out. I dropped it and took forever to get it. That turned a 20 minuate job into an hour and a half. Otherwise this is an easy job that anyone can do. Refrigerator compressor is next. Have fun.
Parts Used:
Range Burner Terminal Block Kit
  • Gregory from Mont Belvieu, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
23 of 33 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!