Parts That Fix Amana Refrigerator AFI2539ERM01 Fridge too warm
This part allows the cold air from the freezer section to be aired into the fresh food section and it is controlled by the thermostat.
This is a condenser fan motor for your refrigerator/freezer. This fan motor is most commonly used with frost-free refrigerators with a condenser coil. It controls the rotation of the condenser fan blade. When the compressor runs, so does this fan, circulating air through the refrigerator grille, cooling the compressor and condenser coils. This fan motor also helps to evaporate excess water in the drain pan. This model is all white in color, and is roughly 4 inches long, 3 inches wide, and 3.5 inches thick.
The compressor run capacitor helps keep the motor running smoothly in refrigerators. It works with various models and is a genuine replacement part. Always unplug the refrigerator before installing the capacitor, and check the part number for compatibility with your model.
Discover the perfect solution for maintaining the right balance of temperature in your refrigerator with the Whirlpool THERMISTOR Refrigerator/freezer thermistor kit. A genuine OEM part, this thermistor kit is specially designed for compatibility with select Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef fridge models. This kit does require a bit of DIY, as instructions are not included and can be obtained from Servicematters.com. The kit boasts a temperature sensor and 2 splice connectors that work in harmony to sense the temperature inside your fridge, sending this crucial information to the electronic control. For maximum personal safety, be sure to unplug your refrigerator and wear work gloves before the installment of this part. This Thermistor Assembly offers a prime solution to your appliance repair needs, keeping your Whirlpool refrigerator performing optimally.
The p-trap drain tube kit may also be known as the duck bill, or the drain pipe, and it is compatible with your refrigerator. The function of the p-trap drain kit is to carry the water that has formed during the defrost cycle to the bottom of the refrigerator, where your drain pan is located. The tools you will need for this repair include a 1/4-inch nut driver and a small flat-blade screwdriver. To do this repair you will need to pull the refrigerator forward in order to reach the lower access panel at the back. This kit includes the tube extension piece and spacer.