Parts That Fix Admiral Dryer AGD4675YQ3 Won’t Start
This motor fits most Whirlpool incorporated dryer brands before 1996. NOTE: Pulley is NOT available separately.
This thermostat (Dryer Operating Thermostat, Dryer Cycling Thermostat, Cycling Thermostat, Dryer Thermostat) is used to maintain a temperature of 155 degrees in the dryer drum. The internal bias heater also allows this thermostat to provide a low heat temperature of approximately 140 degrees when the low temperature setting is selected. The part measures 2 by 1.5 inches, comes in black/silver and is constructed of plastic and metal. The thermostat attaches to the blower wheel housing.
This dryer drum belt (Whirlpool Dryer Belt, Drive Belt) has four ridges, three grooves and is 1/4" wide, and 92 1/4 inches in length. It comes in black and is made of rubber. The belt transfers the rotation of the motor to turn the drum. The belt attaches to the drum, idler pulley, and motor pulley.
Discover the quality and reliability of the Whirlpool Push-to-Start Switch. This genuine OEM part is designed to work seamlessly with certain models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef clothes dryers. Serving as a crucial element, this switch triggers your dryer to start when you press and release the button, making the operation convenient and easy. Remember to disconnect the power before installing this part, and consider using work gloves to protect your hands. Please ensure the part number is correct for your model before finalizing your purchase as variations in size and shape can occur. Embellish your appliance with this essential Whirlpool Push-to-Start Switch and enjoy an improved laundry experience.
This is a door switch that is compatible with models of dryers. The door switch in a dryer is designed to communicate with the control board when the door is open or closed. If this door switch is damaged or not working properly, it will cause your dryer to incorrectly detect whether the door is closed and will normally result in your dryer not being able to start or stopping a cycle randomly. This door switch is made entirely of plastic with the door switch tab on one end, and its wire harness on the other. Replacing this door switch is easy but does require some slight disassembly of your dryer, which you will need a screwdriver and wrench for. This door switch is an OEM part and does not come with its necessary securing screws.
The blower wheel is a squirrel cage type wheel whose purpose is to move the air through the room or appliance. The blower wheel spins on the motor shaft to blow air through the dryer drum and out through the exhaust.