Models > AGV14

AGV14 General Electric Air Conditioner - Overview

Models starting with AGV14

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Frame Guide - Black – Part Number: WJ05X10024
Frame Guide - Black
★★★★★
★★★★★
(1)
PartSelect #: PS274402
Manufacturer #: WJ05X10024
This part attaches to the curtain to help hold it in place.
$17.79
  Special Order
Condenser Fan Blade – Part Number: WJ73X10016
Condenser Fan Blade
PartSelect #: PS278354
Manufacturer #: WJ73X10016
$108.61
  Special Order
FAN BLADE – Part Number: WJ73X10087
FAN BLADE
PartSelect #: PS962192
Manufacturer #: WJ73X10087
This part attaches to the motor to help circulate the air.
$59.70
  Special Order
BRACKET SILL SUPPORT – Part Number: WJ01X10074
BRACKET SILL SUPPORT
PartSelect #: PS274131
Manufacturer #: WJ01X10074
  No Longer Available
BRACKET SILL SUPPORT – Part Number: WJ01X10145
BRACKET SILL SUPPORT
PartSelect #: PS274194
Manufacturer #: WJ01X10145
$7.59
  Special Order
CLAMP SPRING – Part Number: WJ03X10016
CLAMP SPRING
PartSelect #: PS274356
Manufacturer #: WJ03X10016
$10.40
  Special Order
THERMOSTAT – Part Number: WJ28X10013
THERMOSTAT
PartSelect #: PS276034
Manufacturer #: WJ28X10013
$38.88
  On Order
ANTI-VIBRATION BUSHING – Part Number: WJ01X10141
ANTI-VIBRATION BUSHING
PartSelect #: PS274190
Manufacturer #: WJ01X10141
$9.28
  Special Order
KNOB Assembly – Part Number: WJ12X10024
KNOB Assembly
PartSelect #: PS274620
Manufacturer #: WJ12X10024
$8.99
  Special Order
UPPER GUIDE – Part Number: WJ66X10018
UPPER GUIDE
PartSelect #: PS277387
Manufacturer #: WJ66X10018
$31.58
  Special Order
FILTER Assembly,A/C – Part Number: WJ85X10008
FILTER Assembly,A/C
PartSelect #: PS279024
Manufacturer #: WJ85X10008
  No Longer Available
BRACKET SILL SUPPORT – Part Number: WJ01X10234
BRACKET SILL SUPPORT
PartSelect #: PS961288
Manufacturer #: WJ01X10234
$7.59
  Special Order
View More
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Fan blade was broken
Took cabinet off. Loosened rear condenser and moved it out of the way. Took fan blade off of motor shaft and replaced. Actually broke off small part of blade hub tapping it on to the shaft with a hammer - use a block of wood to protect!
Parts Used:
Condenser Fan Blade
  • Jonathan from Baltimore, MD
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken fan blade
Removed 10 screws holding fan schroud,top brace,and condenser. Remove schroud from condenser and push back toward fan motor. Pull condenser gently away from fan far enough to remove spring clip from old fan with pliers. Tap on old fan blade hub lightly until it comes off. (Important) Make sure you line up flat side of motor shaft with flat side new fan hub. When lined up tap back on and assemble in reverse order. Took 15 mins to replace and 15 mins to clean condenser.
Read less
Parts Used:
Condenser Fan Blade
  • Dennis from VALLEY SPRINGS, SD
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top