AHTK10AAQ1 General Electric Air Conditioner - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The existing filter had not been cleaned regularly for about three (3) years, so it needed to be replaced.
I used a screw driver and pliers to remove the existing filter. Before installing the new filter, I vacuumed the front grill as well as the metal cooling coils to remove any dust or dirt. I then istalled the new filter by pushing it into the space in front of the metal cooling coils. No tools were required. I then replaced the front grill.
Parts Used:
-
Joel from Waynesboro, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
None
I just wanted a extra filter for the air conditioner so I could clean it and not have to wait for it to dry in the heat of the day
Parts Used:
-
Patricia from FORKED RIVER, NJ
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
5 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!