AMV2307PFS0 Amana Microwave - Overview
Sections of the AMV2307PFS0
[Viewing 7 of 7]Keep searches simple, eg. "belt" or "pump".

Microwave Light Bulb (40w)
PartSelect #: PS2376034
Manufacturer #: 8206232A
This 40w light bulb is a replacement bulb constructed of glass and metal. It is an easy-to-install electrical part which produces 40w of light. If the bulb won't light up then it may be broken and sho...
$8.38
In Stock

Microwave Grease Filter
PartSelect #: PS3650910
Manufacturer #: W10208631A
This Grease Filter is constructed of Acrylonitrile Butadiene Styrene and is used to trap grease and help eliminate odors from the exhaust air while cooking. It attaches onto the exhaust and is rated ...
$27.26
In Stock

Microwave Turn Ring
PartSelect #: PS12584163
Manufacturer #: W11252182
This turntable ring in your microwave makes sure that your glass tray rotates smoothly. Located just above the internal floor, it supports the tray so that your food cooks evenly. A broken turntable r...
$34.95
In Stock

Microwave Mounting Plate
PartSelect #: PS12074431
Manufacturer #: W11025649
This mounting plate is sourced directly from the original manufacturer for use with microwaves. It is a metal plate designed to support a microwave by attaching the microwave to the wall studs. If the...
$21.48
In Stock

Microwave Door Switch
PartSelect #: PS10057151
Manufacturer #: W10727360
This three-terminal switch fits your microwave door. This part is mostly black in color and is about 1.5 inches with metal terminals. You might need to replace this part if your microwave is not heati...
$9.95
In Stock

Microwave Top Mounting Screw
PartSelect #: PS11744892
Manufacturer #: WP8169704
This screw is sold individually.
$8.37
In Stock

Cook Tray
PartSelect #: PS12728436
Manufacturer #: W11367904
The glass turntable tray rotates food in the microwave to ensure even heating. Designed for compatibility with specific models, it provides a stable surface for cookware. Check fitment before ordering...
$53.85
In Stock

Microwave Door Interlock Switch
PartSelect #: PS2361111
Manufacturer #: W10269458
This door interlock switch is a genuine replacement part designed for use in microwaves. It serves a critical safety function by preventing the microwave from operating when the door is open. Because ...
$30.95
In Stock

DIODE
PartSelect #: PS12584264
Manufacturer #: W11256462
This diode, or high voltage diode, is used in microwaves. It is an electrical current control device that ensures power flows in one direction and not the other way. If your microwave produces no heat...
$23.95
In Stock

R Ceramic Fuse 20 A
PartSelect #: PS17629444
Manufacturer #: W11707984
If your microwave is not turning on it could be due to your fuse needing to be replaced. This part protects the microwave by shutting it off if there is an electrical surge. This fuse is just over an ...
$32.95
In Stock

Microwave Light Socket
PartSelect #: PS2342199
Manufacturer #: W10210871
The light socket in your microwave houses the light bulb and connects it to the power source. The light bulb will screw into it, so the light bulb will be held in place. Be very careful when installin...
$9.95
In Stock

Microwave Drive Coupling
PartSelect #: PS3654579
Manufacturer #: W10337248
This glass tray drive coupling, also known as a tray support, is a genuine OEM replacement part. It can help solve the issue of your microwave tray not turning properly. This motor couple connects the...
$8.95
In Stock
Questions And Answers for AMV2307PFS0
Ask our experts a question about this model and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- 2
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rob
August 4, 2021
Door will not latch when closed
For model number AMV2307PFS0
Hi Rob,
Thank you for your question. If your door is not shutting correctly, there are some parts that you will need to check to see which one is causing the issue. You will need to check door switches, the door interlocks the cam plate and the interlock spring. We hope this helps! Good luck with the repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Darlene
February 20, 2025
Looking to replace upper charcoal filter and do not find a part number. Thank you for your assistance.
For model number AMV2307PFS0
Hello Darlene, Thank you for your inquiry. Checking your model, we show the compatible charcoal filter as PS11769323. We hope this helps you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Kim
February 25, 2020
Do I need to take panel off to install new mounting nut?
For model number AMV2307PFS0
Hello Kim, Thank you for the question. You should be able to remove the damper to access the nut to install. We hope this helps.
Was this helpful?
Thank you for voting!
Related Parts:
CHARLES
March 27, 2023
replaced the burnt-out bulb under the microwave, but the light stays on and unable to turn off.
For model number AMV2307PFS0
Hi Charles, thank you for reaching out. We have researched the model and would recommend checking the door switch, part number PS2361113, and the interlock switch, part number PS2361111, for continuity using a multimeter. If they are working fine, the issue might be with the light socket, part number PS2342199, or the control board, part number PS16620227. We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
Related Parts:
Skip
May 17, 2023
When it starts it makes a loder sound than it used to
For model number AMV2307PFS0
Hi Skip, thank you for asking. According to our research, if your microwave is loud or noisy, it could be a result of a defective magnetron tube. The magnetron tube uses high-voltage, high-current DC power that generates the microwave frequency, which cooks the food and is meant to be nearly silent. If it is burned out or damaged, it can emit a high-pitched, growling, or clicking sound. It is a warning that the magnetron is on its last legs and needs replacing as soon as possible. You may need to check the magnetron, part number PS11703077, to fix the issue. Good luck with this repair!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- 2
- Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Common Symptoms of the AMV2307PFS0
[Viewing 8 of 8]Won’t turn on
Fixed by
these parts
these parts



Show All
No heat
Fixed by
these parts
these parts



Show All
Door not closing properly
Fixed by
these parts
these parts



Show All
Tray won’t turn
Fixed by
these parts
these parts



Show All
Exhaust fan not working
Fixed by
these parts
these parts


Show All
Noisy
Fixed by
these parts
these parts


Show All
Doesn’t shut off
Fixed by
these parts
these parts



Show All
Touchpad does not respond
Fixed by
these parts
these parts

Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
light bult needed to be replaced
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the li
... Read more
ght bulb so that we do not need a screwdriver to remove the door to get to the light bulb
Read less
Parts Used:
-
Deborah from Millersville, MD
-
Difficulty Level:Difficult
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
213 of 313 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door switch inconsistent operation for Open/Close sensing.
Ordered top & bottom micro-switches and mounting plate parts. Internet reviews could not find specifics if the issue was due to a top/bottom or combination of micro-switch or mounting plate failure. Pulled the plug. Removed the top vent assembly cover held in by 2 Phillips screws inside the vent. Removed the control panel held in by 1 P
... Read more
hillip screw at the top vent assembly area. Lifted control panel upward to release the catch and moved it off to the side - didn't disconnect any leads. Used a Torx bit to remove the door switch mounting plates at the front and pulled the plates through the opening from the control panel. Documented the wire color code connections, the top plate uses 2 micro's with one using both the closed & open contact. Installed the respective micros on the mounting plates and worked backwards with the wiring and removal steps. Once completed, the open/close sensing has worked every time.
Read less
Parts Used:
-
Mark from HOMER GLEN, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
129 of 153 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bulb "burnt out"
Removed 1 screw, removed "burnt out" bulb and replaced it with new bulb.
Parts Used:
-
Joseph from Pembroke, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
95 of 150 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!