This genuine OEM ice maker kit is designed to fit refrigerators that did not originally come with an ice maker. This kit contains everything needed to install the new ice maker on your refrigerator in...
This is the replacement water tube kit for your refrigerator. This tubing is made of plastic, is 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube, and may...
This authentic Whirlpool refrigerator part is a door shelf rail. It snaps into your refrigerator door and prevents items from sliding or falling out when your open the door. It is made of plastic and ...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate...
This is a replacement dairy compartment door for your refrigerator. The dairy compartment door opens and closes to allow access to the dairy items stored in the refrigerator door. Because it is made o...
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
October 26, 2022
freezer light doesnt work and don't know if it is the door switch or light bulb. I dont see a replacement for the bulb.
For model number ASI2575GRS05
Hello Mike, thank you for getting in touch. The freezer light module for your model is part number PS16731134, and the light switch is part number PS11742478. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
Can I order the plastic piece that snaps on the crisper cover glass? The piece that the crisper frame slides into, perpendicular to the actual frame drawer glide slots.
For model number ASI2575GRS05
Hello Everett, thank you for contacting us. The part you are looking for is shelf support, part number PS12578346. It supports the crisper drawer lid. If you need help placing an order, customer service is open 7 days a week!
Hello Steve, thank you for contacting us. The compatible water filter housing for your model is part number PS12348209. If you need help placing an order, customer service is open 7 days a week!
Hello Judith, thanks for the great question. Unplug or disconnect your power source to the refrigerator. The light module should be able to be popped out of place by depressing the tabs that hold it in, using the edge of a putty knife. Once it is popped out, you will need to disconnect the light's wiring by pushing the tab on the connector to release it. The LED light module that is compatible with your unit is PartSelect Number PS16731134. If you would like to purchase, you may do so online or by calling Customer Service. Hope this helps!
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
I was clening my uprght freezer and noticed that it was preped for an icemaker. I first went to the Whilpool website and could not find my part as my freezer was a 2008 model.
I saw PartSelect on the search page and went to thier site. I put in my modle number of the Whilpool Ice maker kit that was on the back of my freeze
... Read morer. PartSelect had the part in stock and approx $18.00 less than the other kits listed on the Whilpool site (that did not match my kit number). I orderd the kit on Sunday and it arrived on Wednesday. It took less than and hour to install. Every part I needed was included. The following day I installed the water line and now I have an extra icemaker.