BV165 Leaf Blower / Vacuum - Overview
Models starting with BV165
Click on the best match to narrow your results.
- BV165 Weed Eater Leaf Blower / Vacuum (Handheld Blower)
- BV1650 (Type 3) Poulan Leaf Blower / Vacuum (Weed Eater BV1650 (Type 3) Gas Blower)
- BV1650 (Type 2) Poulan Leaf Blower / Vacuum (Weed Eater BV1650 (Type 2) Gas Blower)
- BV1650 (Type 1) Poulan Leaf Blower / Vacuum (Weed Eater BV1650 (Type 1) Gas Blower)
- BV1650 Weed Eater Leaf Blower / Vacuum (Handheld Blower)
- BV1650LE (Type 2) Poulan Leaf Blower / Vacuum (Weed Eater BV1650LE (Type 2) Gas Blower)
- BV1650LE (Type 1) Poulan Leaf Blower / Vacuum (Weed Eater BV1650LE (Type 1) Gas Blower)
Keep searches simple, eg. "belt" or "pump".
Trimmer Fuel Filter
PartSelect #: PS9285148
Manufacturer #: 530095646
This Genuine OEM fuel filter is designed to maintain the performance and longevity of your equipment by preventing dirt and debris from entering the carburetor. Located inside the fuel tank, this esse...
$5.95
In Stock
Chainsaw Fuel Line
PartSelect #: PS9472280
Manufacturer #: 530069247
This is the replacement fuel line 25 Inch for several OPE products that use small engines. The fuel line carries fuel from the tank to the carburetor. Over time, the fuel line can become badly clogged...
$9.93
Special Order
Chainsaw Purge Line
PartSelect #: PS9472264
Manufacturer #: 530069216
This part is the replacement tank/purge line for your outdoor power equipment. It is made of clear plastic and is sold individually. The tank/purge line returns excess fuel from the carburetor to the ...
$8.98
Special Order
Spark Plug
PartSelect #: PS9484192
Manufacturer #: 952030150
This genuine Spark Plug, RCJ8Y, is sold individually, comprised of steel and ceramic, and is white and silver in color. The function of the spark plug is to ignite a mixture of air and fuel in the com...
$5.71
Special Order
Chainsaw Fuel Cap w/Retainer
PartSelect #: PS9468748
Manufacturer #: 530014347
The Fuel Cap with retainer, often simply known just as the fuel cap, keeps fuel from splashing out of your tank and debris from entering it. Black in color, it is sold individually and made of plastic...
$9.17
Special Order
Spark Plug (RCJ6Y)
PartSelect #: PS9484195
Manufacturer #: 952030249
The manufacturer-certified white and silver Spark Plug RCJ6Y ignites the air-fuel mixture inside the combustion chamber of your engine. Consult your manual or check your model number to determine if t...
No Longer Available
Chainsaw Gasket and Diaphragm Kit
PartSelect #: PS9472427
Manufacturer #: 530069844
This is a genuine manufacturer-sourced replacement gasket repair kit that is specially made for use with Paramount and Poulan lawn and garden equipment. It is utilized to replace carburetor gaskets an...
$22.40
Special Order
Leaf Blower Vacuum Bag Assembly
PartSelect #: PS9971436
Manufacturer #: 530095564
This OEM Vacuum Bag holds grass and leaf clippings when the blower is switched to vacuum mode, and is attached to the exit port. It is constructed of white fabric. If broken due to wear/fatigue it wil...
$34.86
Special Order
Chainsaw Rope
PartSelect #: PS9472269
Manufacturer #: 530069232
The chainsaw starter rope is a three-foot-long white rope that is approved by the original equipment manufacturer, and which wraps around the recoil pulley and is pulled to start the engine. Installat...
$7.46
Special Order
Trimmer Piston Ring
PartSelect #: PS9482765
Manufacturer #: 545154001
This metal ring in your engine, known as the piston ring, seals the gap between the piston and cylinder wall. It makes sure that the gases produced during combustion do not escape and that the engine ...
$4.99
Special Order
Vacuum Bag Kit
PartSelect #: PS9971875
Manufacturer #: 530402533
This is a vacuum bag made for blowers and vacuums and is attached to the vacuum to collect whatever material is sucked into the equipment. Measuring approximately 31-inches long and 21-inches wide, th...
No Longer Available
Common Symptoms of models starting with BV165
[Viewing 2 of 2]Will Not Start
Fixed by
these parts
these parts
Show All
Engine stops after a few seconds or minutes
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Both the Fuel line and the Engine fuel line, where dry rotted.
1) While still attached to the fuel tank, I first sized up the old fuel lines with the newer fuel lines.
2) With a pair of needle nose players, I then removed the old dry rotted fuel ?? lines, from the fuel tank.
3) I cleaned the fuel tank and around the carburetor area, to insure that there was no debris, that could possibly fa ... Read more ll into the path of the new fuel lines installation.
4) I then installed the smaller one of the fuel lines, so that it would be out of the way, of the larger fuel line. I Pulled the fuel line through the smaller hole in the fuel tank, with needle nose players. I pulled the smaller fuel line out through the fuel tank filler hole, attached the fuel filter to the smaller fuel line. I Made sure that the fuel filter was extended to the furthest end of the fuel tank bottom. Six inches in all. I then attached the smaller fuel line to the carburetor.
5) I Installed the larger fuel line, followed the same procedures as the smaller fuel line.
6) Both fuel lines where cut on an angle for easy installation. No lubricant was necessary.
7) I filled up the fuel tank with fresh fuel and oil, new air filter and spark plug. It started on the first pull. Amazing.
2) With a pair of needle nose players, I then removed the old dry rotted fuel ?? lines, from the fuel tank.
3) I cleaned the fuel tank and around the carburetor area, to insure that there was no debris, that could possibly fa ... Read more ll into the path of the new fuel lines installation.
4) I then installed the smaller one of the fuel lines, so that it would be out of the way, of the larger fuel line. I Pulled the fuel line through the smaller hole in the fuel tank, with needle nose players. I pulled the smaller fuel line out through the fuel tank filler hole, attached the fuel filter to the smaller fuel line. I Made sure that the fuel filter was extended to the furthest end of the fuel tank bottom. Six inches in all. I then attached the smaller fuel line to the carburetor.
5) I Installed the larger fuel line, followed the same procedures as the smaller fuel line.
6) Both fuel lines where cut on an angle for easy installation. No lubricant was necessary.
7) I filled up the fuel tank with fresh fuel and oil, new air filter and spark plug. It started on the first pull. Amazing.
Read less
Parts Used:
-
Victor from SCOTTSVILLE, KY
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Socket set
47 of 62 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!