CAH18ECR20 Crosley Air Conditioner - Overview
Sections of the CAH18ECR20
[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
PC BOARD
PartSelect #: PS9864875
Manufacturer #: 5304496261
Control boards, also known as display boards or user interface boards, are used within electronics such as appliances to control and manage most, if not all the processes within the appliance. This co...
No Longer Available
Questions And Answers for CAH18ECR20
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Donny
June 28, 2022
Air conditioning blowing hot air all the time compressor comes on for about 10 seconds then hot air
For model number CAH18ECR20
Hello Donny, thank you for your question. It could be your unit's refrigerant levels might be low. This usually indicates a refrigerant leak in your system! If that's the case, your air conditioner will continue to run and blow out warm air, trying to reach the temperature you set on your thermostat. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Common Symptoms of the CAH18ECR20
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
A/C blows cold for 10 seconds then heating element comes on and blows hot
I bought both PC BOARDS and the 3 thermostats even tho I read that cleaning the thermostats will sometimes work. Installed thermostats but still blew hot. Installed push button control module because wife said the buttons don't always work, still blows hot.
Slide out A/C from frame about 8 inches, remove 4 screws that hold top cover ... Read more . All the wires and thermostat connectors must be removed to get main control module out. I took lots of pictures and made my own wiring diagram with notes. The wire connectors look like regular push type, but they do have a release tab that can be pushed with needle nose plyers. Remove screws holding module, and do everything in reverse. Yes, the A/C works properly now. I spent an extra $110 for the thermostats and push button control, but am very happy it works and didn't have to buy a new A/C.
Slide out A/C from frame about 8 inches, remove 4 screws that hold top cover ... Read more . All the wires and thermostat connectors must be removed to get main control module out. I took lots of pictures and made my own wiring diagram with notes. The wire connectors look like regular push type, but they do have a release tab that can be pushed with needle nose plyers. Remove screws holding module, and do everything in reverse. Yes, the A/C works properly now. I spent an extra $110 for the thermostats and push button control, but am very happy it works and didn't have to buy a new A/C.
Read less
Parts Used:
-
William from Selma, TX
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers
6 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fan blade broken when purchased Vibration very bad
Removed Window Air Conditioner from box purchased New. Plastic Fan Blade was broken when purchased and Appliance store would not repair. Second phase removed cover from the fan area removed and replaced fan blade replaced cover and reinstalled unit into the window case.
Parts Used:
-
Don from Tomball,, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers, Socket set
3 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!