CARDS801WW-P1131936NWW Amana Range - Overview
Sections of the CARDS801WW-P1131936NWW
[Viewing 14 of 14]Keep searches simple, eg. "belt" or "pump".

2 Piece Broiler Pan
PartSelect #: PS971245
Manufacturer #: 4396923
This is cookware designed for use in your range or oven. It is a two-piece dish that is used to grill or cook food while the broil function is on, meaning it can withstand high temperatures. This set ...
$47.20
In Stock

Wire Oven Rack
PartSelect #: PS11740769
Manufacturer #: WP314763J
This wire oven rack is used on some ovens and ranges. It is twenty-three inches long and it is made of metal.
$41.95
In Stock

Range Temperature Sensor
PartSelect #: PS11757456
Manufacturer #: WPY0314907
The temperature sensor is a part for the oven, on your range. This temperature sensor has a body length of just over 3 inches. The purpose of this part is to measure the temperature within the oven an...
$100.80
In Stock

Range Installation Screw
PartSelect #: PS11741612
Manufacturer #: WP3400882
This screw is sold individually.
$7.95
In Stock

Grease Filter
PartSelect #: PS11757449
Manufacturer #: WPY0307363
This aluminum grease filter is eighteen inches long and four inches wide.
No Longer Available

Outer Bake Element - 2800W
PartSelect #: PS11744641
Manufacturer #: WP77001096
This bake element is found on the bottom of the oven.
$35.95
In Stock

Hinge Kit - Right Side
PartSelect #: PS2172201
Manufacturer #: R0706011
The hinge kit, or oven door hinge, is used in ranges and wall ovens. The hinge attaches to the right side of the door and controls how fast the door opens. At a specific angle, it allows the door to r...
No Longer Available

Top Burner Knob
PartSelect #: PS2030339
Manufacturer #: 308464W
Sold Individually. This white knob accepts a D-shaped shaft.
No Longer Available

Leveling Leg
PartSelect #: PS1644541
Manufacturer #: 74001311
Sold Individually.
No Longer Available
Questions And Answers for CARDS801WW-P1131936NWW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the CARDS801WW-P1131936NWW
[Viewing 6 of 6]Little to no heat when baking
Fixed by
these parts
these parts


Show All
Door won’t close
Fixed by
these parts
these parts


Show All
Element will not heat
Fixed by
these parts
these parts

Show All
Oven is too hot
Fixed by
these parts
these parts

Show All
Will Not Start
Fixed by
these parts
these parts

Show All
Oven not heating evenly
Fixed by
these parts
these parts

Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Getting F 1 and 2 error codes and the oven turned itself off.
Really easy but in this model there are 2 versions of the sensor, male and female. The website didn't have any place to see that. So the first sensor that came was male but we needed the other. After calling they sent me a return form and sent the new part (which was actually much cheaper) overnight and it went in very quickly. Would che
... Read more
ck this out again when anything went wrong. they are great folks to work with.
Read less
Parts Used:
-
Suzanne from Acton, MA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
76 of 144 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Modern Maid Oven, Bake element barely warming
1. Locate range breaker and switch off.
2. Verify range has no power by switching fan or light on.
3. Have someone shine flashlight beam on inside back of oven.
4. Use screwdriver to remove two screws holding outer element to back of oven wall.
5. Carefully pull element out until wires attached to ends of element can b ... Read more e seen.
6. Pull connectors off ends of element, don't let them pull back into the insulation material.
7. Connect new element to wires.
8. Push element back into position and re-attach the screws.
9. Make sure that the element is resting nicely on the floor of the oven.
10. Reset the range breaker and test the oven.
2. Verify range has no power by switching fan or light on.
3. Have someone shine flashlight beam on inside back of oven.
4. Use screwdriver to remove two screws holding outer element to back of oven wall.
5. Carefully pull element out until wires attached to ends of element can b ... Read more e seen.
6. Pull connectors off ends of element, don't let them pull back into the insulation material.
7. Connect new element to wires.
8. Push element back into position and re-attach the screws.
9. Make sure that the element is resting nicely on the floor of the oven.
10. Reset the range breaker and test the oven.
Read less
Parts Used:
-
Philip from Severna Park, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
16 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cracked inside glass window of oven door
1. Slide the Oven door out of its hinges after removing the screws - see Owner's manual.
2. Place door on floor with the inside face on the floor.
3. Remove screws on side and bottom of door and the lift away the side stamped pieces.
4. Remove screws as they becom visible and lift away the pieces till you reach the inside ... Read more glass.
Remember the sequence and be careful not to strip the Phillips screws when unscrewing.
2. Place door on floor with the inside face on the floor.
3. Remove screws on side and bottom of door and the lift away the side stamped pieces.
4. Remove screws as they becom visible and lift away the pieces till you reach the inside ... Read more glass.
Remember the sequence and be careful not to strip the Phillips screws when unscrewing.
Read less
Parts Used:
-
Uday from Ann Arbor, MI
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
8 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!