CFE28USHBSS General Electric Refrigerator - Overview
Sections of the CFE28USHBSS
[Viewing 11 of 11]
Keep searches simple, eg. "belt" or "pump".
Refrigerator Temperature Sensor
PartSelect #: PS304103
Manufacturer #: WR55X10025
This sensor (Temperature Sensor, Thermistor, Refrigerator Temperature Sensor) sends the temperature reading of the compartment to the control board. If you notice your refrigerator is too warm, too co...
$28.95
In Stock
Refrigerator Water Filter
PartSelect #: PS10063209
Manufacturer #: RPWFE
This NSF-certified water filter helps to improve the taste, quality, and health of your water by removing a number of contaminants including mercury, lead, and trace pharmaceuticals. The filter should...
$68.55
In Stock
Refrigerator Run Capacitor
PartSelect #: PS11764031
Manufacturer #: WR55X24064
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. This part has been updated by the manufacturer and may appear different t...
$54.40
In Stock
Clear Refrigerator Door Bin Gallon Size
PartSelect #: PS6011779
Manufacturer #: WR71X11044
Clear plastic gallon refrigerator door bin. It is used for storing fresh food and it is the right hand side.
$60.71
In Stock
Dishwasher Screw 816 Hxw 1/2 (Stainless Steel)
PartSelect #: PS258461
Manufacturer #: WD02X10067
This OEM-compatible screw is designed for use with many GE dishwashers. Measuring 8-16 HXW and 1/2" in length, this stainless steel screw secures the middle spray arm hub to the upper rack assembly, e...
$13.95
In Stock
Refrigerator Fresh Food Evaporator Fan Motor
PartSelect #: PS12172983
Manufacturer #: WR60X26866
The Refrigerator Evaporator Fan Motor is an OEM replacement part for some GE refrigerators. It is responsible for circulating air over the evaporator coils, which are responsible for cooling the refri...
$75.95
In Stock
Refrigerator Crisper Pan Glass Cover
PartSelect #: PS5135750
Manufacturer #: WR32X10865
Glass only.
$48.95
In Stock
Refrigerator Set Screw
PartSelect #: PS963200
Manufacturer #: WR01X10450
This is a replacement set screw for your refrigerator door. The set screw attaches the door handle to the stud on the refrigerator door. The screw is approximately ¼ of an inch in length and unlike so...
$13.95
In Stock
Refrigerator Cover Led Assembly
PartSelect #: PS4704284
Manufacturer #: WR55X11132
COVER LED Assembly FF
$48.95
In Stock
Freezer Door Gasket (Dorian Gray)
PartSelect #: PS16226511
Manufacturer #: WR14X36194
This is a door gasket for the freezer compartment of your refrigerator. Door gaskets are made of rubber and plastic and are designed to seal the cold interior of the freezer compartment from the ambie...
$55.39
In Stock
Door Ice Bin
PartSelect #: PS6883669
Manufacturer #: WR71X11046
Enhance the functionality of your GE refrigerator with this Left Hand Ice Door Mid Bin. Specifically designed for streamlined storage, this robust bin conveniently secures inside your refrigerator doo...
$48.95
In Stock
Questions And Answers for CFE28USHBSS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mary
November 11, 2019
There is a light on the bottom of the left door that shines in the freezer when its open. This light should go out when all doors are closed. It does not. How do i fix this?
For model number CFE28USHBSS
Hello Mary and thanks for writing.
Sounds like your light switch is defective. Part Number: PS8758429 is in the list of compatible items for your model. We hope this helps. Please contact us anytime.
Was this helpful?
Thank you for voting!
Related Parts:
LIGHT SWITCH
$33.95
In Stock
Thomas
September 7, 2023
Where is the mother board located
For model number CFE28USHBSS
Hi Thomas, thank you for your inquiry. We have found that the main control board of the refrigerator model you mentioned is located at the back bottom left side of the unit, behind the cover. Remove the cover to access the control board. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Common Symptoms of the CFE28USHBSS
[Viewing 22 of 22]Fridge too warm
Fixed by
these parts
these parts
Show All
Light not working
Fixed by
these parts
these parts
Show All
Freezer section too warm
Fixed by
these parts
these parts
Show All
Fridge too cold
Fixed by
these parts
these parts
Show All
Freezer not defrosting
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Fridge and Freezer are too warm
Fixed by
these parts
these parts
Show All
Frost buildup
Fixed by
these parts
these parts
Show All
Too warm
Fixed by
these parts
these parts
Show All
Fridge runs too long
Fixed by
these parts
these parts
Show All
Freezer too cold
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Not dispensing water
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Door won’t open or close
Fixed by
these parts
these parts
Show All
Ice maker not making ice
Fixed by
these parts
these parts
Show All
Clicking sound
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Door Sweating
Fixed by
these parts
these parts
Show All
Doesn’t stop running
Fixed by
these parts
these parts
Show All
Too cold
Fixed by
these parts
these parts
Show All
Ice maker won’t dispense ice
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
my refigerator was warm but the freezer was cold and working correcttly
I went to a GE repair center to explain my problem, the service center reccomended that I have a techinician come out o look at it. $75.00 for the visit and what ever labor and materials wuld cost.
I went on line to see if there were others having this same problem and found that there were many with the same problem.
... Read more
/>After reading some of the ways that people found out what was wrong ...it became a matter of three components, the timer, heater or thermostat.
I tried the most common component and the less expensive one first , the thermostat switch I installed it very easily snipping two wires and attaching the news using wire nuts I used the diagram on this website to pinpoint the component and there has not been a problem since.
I went on line to see if there were others having this same problem and found that there were many with the same problem.
I tried the most common component and the less expensive one first , the thermostat switch I installed it very easily snipping two wires and attaching the news using wire nuts I used the diagram on this website to pinpoint the component and there has not been a problem since.
Read less
Parts Used:
-
michele from North Smithfield, RI
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
296 of 380 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
refrigerator was getting too cold
I removed the old temperature sensor by cutting the wires. I attached the wires of the new sensor with wire nuts and mounted it in the same bracket.
Parts Used:
-
Larry from Menomonie, WI
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
149 of 215 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Sticking Light Switch
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the c
... Read more
atch clip so the switch could be pulled out further each time the catch clip was depressed to the next detent. Then I used the screw driver on the left site to encourage the switch past the detents on the left and very quickly the switch was out of the mount. The wires from the refrigerator pulled out with the old switch. I unplugged the old switch from the wires and plugged in the new switch and shoved the new switch back into the mount, wiggled it a couple of times to make sure it was secure and the job was done. Once I applied the vise gripes at first, the whole job took less than a minute.
Read less
Parts Used:
-
Jonathan from Lilburn, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
120 of 166 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!