Models > CNNS208H

CNNS208H (9T01B) Maytag Refrigerator - Overview

Sections of the CNNS208H

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Door Shelf Trim Retainer – Part Number: WP65245-1
Door Shelf Trim Retainer
PartSelect #: PS11743360
Manufacturer #: WP65245-1
This door shelf trim retainer is just over one inch long. It is all white in color and it is made entirely of plastic.
$11.71
  In Stock
Screw – Part Number: WP3-24838-048
Screw
PartSelect #: PS11740623
Manufacturer #: WP3-24838-048
Sold individually.
$6.79
  In Stock
Hinge Pin Bushing – Part Number: 66036-1
Hinge Pin Bushing
★★★★★
★★★★★
(1)
PartSelect #: PS2064817
Manufacturer #: 66036-1
This bushing is used with a 1/4-inch pin. This part is found in refrigerators (and sometimes freezers). The bushing provides a bearing surface for the hinge pin that rotates. Every time you are openin...
  No Longer Available
Screw – Part Number: 61005388
Screw
PartSelect #: PS2060739
Manufacturer #: 61005388
Sold Individually.
  No Longer Available
Door Shelf Retainer Bar - Cut to Fit – Part Number: WP61003045
Door Shelf Retainer Bar - Cut to Fit
PartSelect #: PS11743151
Manufacturer #: WP61003045
This cut-to-fit refrigerator door shelf retainer bar comes at twenty-seven inches long. It is made entirely of metal.
$83.38
  In Stock
Butter Dish – Part Number: 67004412A
Butter Dish
PartSelect #: PS1632810
Manufacturer #: 67004412A
  No Longer Available
Door Hinge Washer – Part Number: 54233-1
Door Hinge Washer
PartSelect #: PS2049932
Manufacturer #: 54233-1
This door hinge washer is used between the lower hinge pin and the lower hinge bushing.
  No Longer Available
Washer – Part Number: WP52185-1
Washer
PartSelect #: PS11742796
Manufacturer #: WP52185-1
This door hinge washer is less than an inch in diameter. It is all white in color and it is made entirely of plastic.
$7.15
  In Stock
BUSHING- L – Part Number: 66034-1
BUSHING- L
PartSelect #: PS2064814
Manufacturer #: 66034-1
The bushing is made of white plastic and is for a 3/8-inch pin. This bushing is part of your refrigerator assembly and is found on the top of the door. A worn-out bushing will cause your door to becom...
$22.43
  Special Order
Lower Hinge Pin – Part Number: 53672-1
Lower Hinge Pin
PartSelect #: PS2049401
Manufacturer #: 53672-1
This lower hinge pin is almost an inch long. It is made of metal.
  No Longer Available
SHIM- UPPE – Part Number: 65031-1
SHIM- UPPE
PartSelect #: PS2063516
Manufacturer #: 65031-1
  No Longer Available
SHIM- LOWE – Part Number: 60626-1
SHIM- LOWE
PartSelect #: PS2057271
Manufacturer #: 60626-1
  No Longer Available

Questions And Answers for CNNS208H

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Pantry Drawer Cover keeps falling off, not held in place by End Cap Kit
I removed the 2 crisper drawers and the glass shelf directly above the Pantry Drawer. Removed the Pantry Drawer and Pantry Drawer cover so you have easy access to the Right-Hand End Cap. On the right-hand End Cap, there are 2 screws which hold the End Cap in place, use a 1/4 inch driver to unscrew the screws from the front of the cabinet on the End Cap and half-way in of the cabinet, leave the screws in their holes in the End Cap. Lift gently to get off a small plastic pin, and move the End Cap away from the Cabinet. You don't need to completely pull the End Cap out of the cabinet, it'll move more like a door opening. Place 2 washers on each screw and gently put the End Cap back into place, being careful NOT to jostle too much so the washers don't fall off the screws. You will need to gently lift the End Cap back in to place over the plastic pin. Hand-tighten the screws back into place with the 1/4 in driver. Remount the Pantry Drawer on the sliders. When you go to install the Pantry Drawer Cover, you will need to gently push on one of the pins to get the cover back into place. Put glass and crisper drawers back into place.

Test by gently pulling on the Pantry Drawer. If properly mounted, the pins will extend fully into the Cover and will keep it secure when opening the Pantry Drawer.
Parts Used:
Washer
  • Gerald from TANEYTOWN, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hinge missing from acquired refrigerator
We got a refrigerator at a yard sale for free. The door was off and much of it disassembled. When we put it together we realized the top hinge was missing. We asked the previous owner and they didn't have it. We found it with your wonderful web site which so wonderfully detailed the parts.
It was a breeze to put it together and we got a refrigerator for about $30.
Parts Used:
Upper Hinge - DISCONTINUED Washer
  • George from Morrisville, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!