EI30MH55GBA Electrolux Microwave - Overview
Sections of the EI30MH55GBA
[Viewing 4 of 4]Keep searches simple, eg. "belt" or "pump".

SWITCH
PartSelect #: PS8769124
Manufacturer #: 5304493153
The relay switch may also be known as the door micro switch and is a part for your microwave. The function of this part is to monitor the door latch and communicate whether the door latch is open or c...
$65.29
In Stock

20w Light Bulb
PartSelect #: PS979525
Manufacturer #: 5304440031
This 20-watt lightbulb is most commonly found in the microwave. The lightbulb brightens the interior of the microwave while it is running so you can keep an eye on the food while it cooks. You will ne...
$22.95
In Stock

Door Open Lever
PartSelect #: PS3506555
Manufacturer #: 5304485407
This door release lever, also known as a door open lever, is an original manufacturer replacement for microwave/oven combos. When the door release button is pressed, the lever releases the door latch,...
$51.36
In Stock

Door Latch Spring
PartSelect #: PS979582
Manufacturer #: 5304440316
The microwave door latch spring creates tension, and engages the door latch when the door is closed. This spring is made completely of metal, and is approximately 1 inch long. If your microwave door w...
$50.44
In Stock

Microwave Vent Grille Mounting Screw
PartSelect #: PS979716
Manufacturer #: 5304441378
Sold individually.
$22.95
In Stock
Manuals & Care Guides for EI30MH55GBA
Click to downloadInstall
Installation Instructions
(1.69MB)
Manual
Owner's Manuals
(0.56MB)
Wiring
Wiring Diagram
(0.67MB)
Questions And Answers for EI30MH55GBA
Ask our experts a question about this model and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Helga
September 22, 2022
Exhaust fan runs constantly when plugged in. Replaced the thermal cut off and also a micro door switch due to the microwave microwave not heating, when all the switches were checked with a multi meter for continuity, fixed the no heat issue but now the exhaust fan runs continuously. Everything else works perfectly.
For model number EI30MH55GBA
Hello Helga, thank you for your question. We have researched your model and found that the issue is probably with the Thermostat, part number PS979517. If you require assistance to place an order, please contact customer service. We hope that helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Common Symptoms of the EI30MH55GBA
[Viewing 4 of 4]No heat
Fixed by
these parts
these parts

Show All
Won’t turn on
Fixed by
these parts
these parts

Show All
Door stuck closed
Fixed by
these parts
these parts

Show All
Door not closing properly
Fixed by
these parts
these parts

Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Timer would run but the microwave won't start
I first removed the top plate above the microwave door (3 screws), then I removed the plate containing the buttons and clock. The microwave has 3 relay switches and they are in a little holder. The holder was too difficult to remove so I just removed the bottom switch and replaced. The microwave started right up.
Parts Used:
-
Tim from Chicago, IL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
90 of 145 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
microwave wouldn't turn on but timer worked.
was told buy a repair person to check the door micro switches as it was a common problem. removed the top plastic air grill to get access to the screw that holds in place the control cover. After unplugging the unit, i took out the (2) screws that held in the switches and removed them (3). One switch was a bit melted so i tested it with a
... Read more
12 volt battery and it was bad. Ordered a new one from Part select and got it fast . Works great .
Read less
Parts Used:
-
Steve from Moorhead, MN
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
35 of 62 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave would count down but not run
After unplugging the unit remove the control face buy removing the screws. All three door switchs are on a bracket on the left. Remove the two screws holding the bracket in place and pull out. Disconnect the wires from the three switches and test each switch indivually to determine the bad one. I used a multimeter set on ohms.Replace the
... Read more
bad switch with the new one and replace all the wires. Reassemble the unit and you are good to go.
Read less
Parts Used:
-
Betty from Kimball, TN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
29 of 49 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!