Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
Model has been saved to My Models. If you're not signed in, your lists are available on this device and will expire within 30 days.
Model has been saved to My Models.
The door strike is used in washers and is attached to the door to activate the switch when the door is closed. This ensures that the washer door remains locked and closed. If your door does not stay o...
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
$21.95
In Stock
Order within the next 9 hrs and your part ships today!
This is a bellow, though it may also be known as a door boot seal, and it is a part for your washing machine. The function of the bellow is to prevent leaks by forming a seal in between the wash tub a...
62% OFF
$61.99
$164.01
In Stock
Order within the next 9 hrs and your part ships today!
This is a shoulder screw and is used in conjunction with multiple appliances within your home. This specific model is size 10, and it has 16 threads to an inch. This part is made entirely of metal and...
$10.95
In Stock
Order within the next 9 hrs and your part ships today!
This part is the replacement screw for your washer. The head is approximately inch in diameter and the screw is approximately 3/4 inch in length. It is made of metal and is sold individually. This is...
$15.95
In Stock
Order within the next 9 hrs and your part ships today!
This outer door window, or outer lens, is found in your front-loading washer or dryer. Mounted to the door, it provides visibility and allows you to monitor the washing or drying process. It also acts...
$124.42
In Stock
Order within the next 9 hrs and your part ships today!
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
9 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kimberly
February 16, 2025
Every light and button on the front of the washer works except the time display. It is lit but displays no time. Is it going to be necessary to replace the entire interface/display or can just the display be replaced?
For model number EIFLW50LIW0
Hi Kimberly, thank you for reaching out. It seems that there is an issue with the display panel. The display panel does not come separately. It comes attached with the user interface and display board, part number PS10060574. You may need to replace it to fix the issue. We hope this solves your problem!
Hello and thank you for writing.
The "E35" error means that the water in your washer has overfilled and was signaled by the water pressure switch. This could indicate a faulty water pressure switch PS2349296 and/or possibly a faulty water inlet valve PS2349248. We hope this helps. Please contact us anytime if you require further assistance.
I got the error code for drain. Cleaned out drain hose & filter. Went to plug it back up & now have an error code of 91. Please help
For model number EIFLW50LIW0
Hello Heidi, thank you for contacting us. Based on our research, the error code E91 indicates configuration or communication problems with the electronic parts. You may need to check the wire harness, part number PS2342418, to fix the issue. You may need to check whether the wire harness is connected properly or not. We hope this solves your problem!
When I click the switch to start the cycle, the washer will click, but then it doesn’t do anything. Generally it would do one click then the second click it would start filling
For model number EIFLW50LIW0
Hello Gloria, thank you for your question! A non-starting washing machine that makes clicking sounds is caused by a faulty door latch and switch assembly, part number PS2345085. Glad to be of assistance!
Removed old drawer and replaced it with new one. This is the second drawer assembly I have purchased in 6 months. This piece of junk must be a cash cow for Electrolux. If they would make the small latch out of metal instead of plastic, there would be no problem. But that might cost an additional $ .007 per washer. On the positive side, pa
... Read morertselect.com had the part and delivered it promptly.
Bought new part. #1 Lesson learned: Always inspect the actual part number of the ordered/received part. Verify with number marked on the item somewhere. We did not do this and turned out we reinstalled a slightly smaller bellow (wrong part number received in shipment). We were able to fully install it but it was minutely not laying perfec
... Read moretly around the diameter. So minor we did not notice. We did have great difficulty installing though. Anyway, after 1st test run, bellow already had developed a small hole in bottom right quadrant from rubbing on the drum. Left a bunch of gray powdery debris on the drum too. We did not realize error until that point. Took bellow off again to verify part number on it. It was wrong. That explained why the door was so very tight to close and difficult to open. Other than all that, use the video to do the install. It was free to view and easy to follow.
First, I went to the PartSelect website and easily found the part at a reasonable price. I ordered it early on a Wednesday afternoon, and gladly spent the extra $25 to ship it overnight. That evening, PartSelect sent me an email stating that the part had shipped that very day, and - mistakenly - I took that literally. FedEx tracking predi
... Read morected that the part would arrive on Friday, July 5, which made sense because the 4th was a holiday. But I found out that the part had actually shipped on the 3rd, as the email had informed me. It didn't actually ship until the 4th - up until then, a "shipping label" had been created but it had not shipped. FedEx then revised their arrival date to Monday, 8 July. That clearly wasn't satisfactory. So I went to my local parts distributor, Dayton Appliance Parts, a fifteen-minute drive from my house, and got the same part for $3 cheaper, plus without the $25 shipping fee that PartSelect had charged me for overnight-shipping-that-isn't-actually-overnight-shipping. Once I had the part in hand, installation was a breeze. Two screws removed, pulled the striker, replaced the new part and the screws. Less than two minutes. But no thanks to PartSelect.
