Back
Back
Keep typing for more specific results...

F1273ND LG Washer Dryer Combo - Overview

Sections of the F1273ND

[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Washer Gasket – Part Number: 4036ER2003A
Washer Gasket
★★★★★
★★★★★
(2)
PartSelect #: PS3522854
Manufacturer #: 4036ER2003A
This genuine OEM drum seal gasket prevents water from leaking between the outer tub and spin basket of your washer. It is made of black rubber and measures 2.5 inches in diameter. If your washer is le...
$38.99
  In Stock
BEARING,BALL – Part Number: 4280EN4001A
BEARING,BALL
★★★★★
★★★★★
(2)
PartSelect #: PS12075836
Manufacturer #: 4280EN4001A
$68.96
  In Stock
Bearing,Ball – Part Number: 4280FR4048G
Bearing,Ball
PartSelect #: PS3522894
Manufacturer #: 4280FR4048G
  No Longer Available
Pressure Switch Assembly – Part Number: 6601ER1006E
Pressure Switch Assembly
★★★★★
★★★★★
(3)
PartSelect #: PS3529317
Manufacturer #: 6601ER1006E
Discover the efficiency of this high-quality LG Washer Water Level Sensor Pressure Switch. This part has been designed specifically for certain models of LG washing machines. It functions as a water l...
$68.96
  In Stock
CAP,DRAIN HOSE – Part Number: 5006EN3015A
CAP,DRAIN HOSE
★★★★★
★★★★★
(3)
PartSelect #: PS3635866
Manufacturer #: 5006EN3015A
This drain hose plug, also known as a hose cap, is a genuine OEM part for your washing machine. This plug caps the drain hose from the pump housing, and helps prevent leaks from your washer. Before be...
$10.45
  In Stock
Leg Assembly – Part Number: AFC72755401
Leg Assembly
PartSelect #: PS3532320
Manufacturer #: AFC72755401
This levelling leg is a genuine replacement part. It is used to help keep your washing machine stable and balanced. It helps support your appliance. It screws into the base of your washer, and you can...
$28.71
  Special Order
Shock Absorber – Part Number: 4901ER2003A
Shock Absorber
PartSelect #: PS3583320
Manufacturer #: 4901ER2003A
This is a replacement shock absorber for your washer. The shock absorber is approximately 10 inches long and a little more than one inch wide. It is black and silver in color, and is sold individually...
$36.69
  In Stock
HOLDER – Part Number: 4930EN3004A
HOLDER
★★★★★
★★★★★
(1)
PartSelect #: PS7785207
Manufacturer #: 4930EN3004A
$10.45
  In Stock
CLAMP ASSEMBLY – Part Number: 4861EN3003A
CLAMP ASSEMBLY
PartSelect #: PS7785189
Manufacturer #: 4861EN3003A
$10.45
  In Stock
Locker,Hook – Part Number: 4026ER4004B
Locker,Hook
PartSelect #: PS3522830
Manufacturer #: 4026ER4004B
$38.99
  Special Order
STATOR ASSEMBLY – Part Number: 4417EA1002W
STATOR ASSEMBLY
PartSelect #: PS11700730
Manufacturer #: 4417EA1002W
Discover the power of genuine repair with this LG STATOR ASSEMBLY. Uniquely designed for sturdiness and efficiency, the assembly ensures your appliance works optimally and smoothly. Remember to always...
$218.70
  In Stock
Filter Assembly – Part Number: 6201EC1006L
Filter Assembly
PartSelect #: PS3528919
Manufacturer #: 6201EC1006L
  No Longer Available

Questions And Answers for F1273ND

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the F1273ND

[Viewing 3 of 3]
Water Filling Issues
Fixed by
these parts
Fixing
Show All
Burning smell
Fixed by
these parts
Fixing
Show All
Leaking
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
washer tub shakes violently during spin cycle.
turn washer on it's side. dampers are visible from underneath. use needle nose pliers to "pinch" end of retaining pin and pull pin out. it will take some force to remove. i would recommend replacing all 3 as i had one that had a mounting tab broken off. i then realized the other dampers were bad. there should be resistance in the up and down motion. if not replace.
Parts Used:
Shock Absorber
  • charlie from LAUDERHILL, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
While replacing the tub support (spider) I chose to replace the gasket.
The spider repair and the tub seal replacement are fairly complicated, and time-consuming, but manageable with patience. I viewed the youtube video that showed the process, which gave me confidence. It entails disassembling the machine and removing quite a few major pieces. Take care with the numerous screws and bolts, and be patient and you can be successful. Plan a lot of time for all the steps.
The hardest part is putting the door bellows back on.
Parts Used:
Washer Gasket
  • Robert from HYDE PARK, VT
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
h2o filled w/o stopping
removed top, removed 2 screws, replace part. did not fix problem, the real problem was the water inlet valve, works great, easy fix. thanks
Parts Used:
Pressure Switch Assembly
  • sherman from BROKEN ARROW, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!