The Lower Spray Arm is used in your dishwasher to spray water and clean your dishes. If broken there will be visible damage or your dishes may no longer be cleaned properly. If your spray arm is broke...
$35.34
In Stock
Order within the next 11 hrs and your part ships today!
This grey OEM dishwasher tub gasket is a 73" grey rubber part that creates a seal around the dishwasher to prevent any water leakage during a cycle. If it's damaged or broken, you'll start seeing wate...
$32.35
In Stock
Order within the next 11 hrs and your part ships today!
The single rack roller kit comes with one axle/clip and one wheel/roller. The rack wheel is designed to allow the rack of your dishwasher to roll in and out. If the rack will not complete this task, o...
$6.88
In Stock
Order within the next 11 hrs and your part ships today!
The heating element nut is used to connect the heating element to the dishwasher tub. If water is leaking from underneath your dishwasher, you may need to tighten or replace the heating element nut. R...
$7.82
In Stock
Order within the next 11 hrs and your part ships today!
This lower spray arm is a genuine OEM part for various makes and models of dishwasher and is sold as an individual part. This part attaches to the lower spray assembly of your dishwasher and the lower...
$11.26
In Stock
Order within the next 11 hrs and your part ships today!
If your dishwasher is leaking or not draining properly, you may need to replace the drain hose. The drain hose connects to the pump located below the lower spray arm and aids in proper dishwasher drai...
$26.66
In Stock
Order within the next 11 hrs and your part ships today!
This door seal is for dishwashers.
Door seal seals the gap between the opening to the dishwasher tub and the outer edge of the door.
After installing the door seal, shut the dishwasher door and ...
$32.27
In Stock
Order within the next 11 hrs and your part ships today!
This door spring is manufactured for a dishwasher door. The door spring applies tension to the dishwasher door so that the door does not drop too quickly when it is opening. If the door drops too quic...
$34.99
In Stock
Order within the next 11 hrs and your part ships today!
The upper dishrack roller and axel kit comes with two pieces, a wheel and an axle. This kit is made for your dishwasher. Both pieces measure to be roughly one square inch each, they are made entirely ...
$4.99
In Stock
Order within the next 11 hrs and your part ships today!
This rail end cap, or dishrack stop clip, is a genuine OEM replacement part for your dishwasher. This part keeps the rack in your dishwasher from sliding out. This is a very easy repair, to complete i...
$7.28
In Stock
Order within the next 11 hrs and your part ships today!
This is a drain pump assembly for various compatible models of dishwashers, that is responsible for draining the water from the dishwasher after every cycle. This drain pump assembly is made of plasti...
$100.36
In Stock
Order within the next 11 hrs and your part ships today!
Questions And Answers for FFCD2413US4A
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
9 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sandy
February 29, 2024
My dishwasher door won't latch but the cycle runs anyway
For model number FFCD2413US4A
Hi Sandy, thank you for reaching out. We have concluded that you may have a damaged door latch, part number PS16218716. You may need to replace the door latch to fix the issue. Glad to be of help!
Door will not stay shut. Inside door does not catch
For model number FFCD2413US4A
Hello Mike Thank you for writing. There must be a faulty Latch PartSelect Number PS16218716 or the complement the Strike PartSelect Number PS12746518. We hope this helps.
My dishwasher has not been getting water thru any cycles. I can tell this, since the tablet is never desolved. I believe the clunking noise I must hear is the tablet bouncing around. There is no white residue inside the dishwasher from any calcium buildup anywhere. Also the round rubber mat at the bottom of the dishwasher is not laying flat and looks ripped in places. I'm hoping I don't have to replace the dishwasher that it can be an easy fix. Thank you.
For model number FFCD2413US4A
Hello Mike, thank you for contacting us. Based on the description that you have provided, we would recommend checking the float switch for continuity. If the float switch is fine, then you may need to replace the water inlet valve, part number PS16218688. It supplies water to the dishwasher. We hope this solves your problem!
The dishwasher is clogged, filled with about 1-2 inches of water. Won't drain alone
For model number FFCD2413US4A
Hello Cade, thank you for getting in touch. Based on our understanding of the issue, we would suggest you clean the drain filter. Also, inspect the drain hoses to make sure they are not clogged. If the problem still persists, we recommend you replace the drain pump, part number PS8689824, to fix the issue. We hope this is what you were looking for!
Dishwasher sounds like it is always draining won’t put out any water. Changed the board and inlet valve, and checked the hose for a clogged. Also tested the float for continuity but tested good
For model number FFCD2413US4A
Hello Anthony, thank you for getting in touch. Since you have checked most of the parts which might be causing this issue, we would suggest checking the drain pump, part number PS8689824, for continuity using a multimeter. A faulty drain pump might be causing this issue. We hope this helps!
I have had to keep replacing the spray arm on the bottom of my dishwasher which takes like 2 seconds to do.. First you open the dishwasher and than pull the bottom basked forward and reach down and pull the spray arm up and pop the bottom of the spray arm off and put it on the new spray arm and slip it back into the dishwasher over the t
... Read morehing that makes it spin around.. but the tricky part is and I didn't know this and this is why my dishwasher spray arm kept falling over and melting on the heating element.. you have to turn it till it clicks in.. and your done..
I removed old tub gasket, which the door presses against to make a seal, and put the new one in. Flat tip screwdriver was used to gently press gasket in.