Parts That Fix Frigidaire Washer Dryer Combo FFLG1011MW0 Leaking
This drain hose, used in washing machines, delivers water from the drain pump to the house drain. The hose is 7 1/2 feet (90 inches) long. If your hose is leaking, it is best to replace it with a new one. To repair it, first access the back of the washer and remove the clamp holding the hose. Switch the clamp onto the new hose before placing it back into the fitting. Refer to the manual provided by the manufacturer for further instructions and guidance. Remember to unplug the appliance from the power source before beginning installation.
This is a 120 volt, 60 hertz drain pump that is manufactured to remove water from the tub of your washer once your clothes are washed. This part is the pump and motor assembly, which includes a red flapper to prevent drain backflow. You will need to remove the front panel of your washer to access the drain pump. The tools you will need for the repair are a Phillips screw driver, a putty knife, a pair of slip joint pliers, and a 5/16 nut driver. Be sure to disconnect the water supply from your washer before doing the repair. The metal edges on the appliance are sharp, so use work gloves to safely complete the repair.
The tub ring seal or splash cover seal is used for washers. This part seals the tub cover to the outer one and prevents water leakage from around the tub ring. If your seal is damaged and you are experiencing water leakage, it is best to replace this part. Refer to the manual provided by the manufacturer for further installation instructions. Remember to unplug your washer from the power source before starting this installation process.
This Frigidaire Fill Nozzle Hose is a genuine OEM part, crafted to fit some models of Frigidaire, Electrolux, White Westinghouse, and Tappan appliances. Ideal for washers, this product directs the fill water from the water inlet valve into the tub. It may consist of multiple components, so it's advised to consult your parts diagram for a list of included parts. Before installing this part, ensure the washer is unplugged, and the water supply is shut off for safety reasons. We recommend wearing work gloves for protection during the installation process. Please double-check compatibility with your model before purchase to ensure a perfect fit.