GJC3034RB06 Whirlpool Cooktop - Overview
Sections of the GJC3034RB06
[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
Range 6 Inch Element w/Limiter
PartSelect #: PS11764915
Manufacturer #: W10823711
This is a radiant surface element with limiter, and it works in conjunction with your range. The function of this part is to give heat to the surface directly above it, on cooking area stove top.This ...
$124.21
In Stock
Range Dual Surface Element 2500w/1200w
PartSelect #: PS11764902
Manufacturer #: W10823692
This is the replacement large surface element for your cooktop or range. It is approximately 10-inches in diameter and is 1200/2500 watts. The large surface element is installed under the cooktop and ...
$124.21
In Stock
Range Inifinite Switch
PartSelect #: PS11747252
Manufacturer #: WP9759474
This switch is used for the right rear and left front burner.
$75.84
In Stock
Range 6 Surface Element Infinite Switch
PartSelect #: PS11740892
Manufacturer #: WP3191049
This switch controls the stove top surface burner.
$75.83
In Stock
Range Burner Knob
PartSelect #: PS11745694
Manufacturer #: WP8286043BL
Sold individually.
$24.95
In Stock
Refrigerator Screw
PartSelect #: PS11740992
Manufacturer #: WP3196557
Sold individually.
$7.95
In Stock
Surface Element Switch
PartSelect #: PS11740893
Manufacturer #: WP3191050
This switch controls the stove top surface burner.
$78.16
In Stock
Accusimmer Rotary Switch
PartSelect #: PS11747362
Manufacturer #: WP9762441
Introducing the genuine OEM Whirlpool Accusimmer Rotary Switch, an essential part for your cooktop operation. This highly dependable component doesn't merely turn your element on and off, it's also re...
$75.56
In Stock
Manuals & Care Guides for GJC3034RB06
Click to downloadInstall
Installation Instructions
(0.37MB)
Install
Installation Instructions
(1.76MB)
Install
Installation Instructions
(0.38MB)
Manual
Owner's Manuals
(2.25MB)
Questions And Answers for GJC3034RB06
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the GJC3034RB06
[Viewing 2 of 2]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Right rear burner went bad
Turned the breaker off, I removed 2 screws securing the range top to the range, opened the top and secured it in the up position, Removed the 2 screws securing the element ,one at a time I swapped the quick connectors from the old element to the new and repeated the process in reverse. I save over $100.00 in labor, plus most companies get
... Read more
you for a trip charge. It was easy!!
Read less
Parts Used:
-
Mark from Loxahatchee, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
149 of 176 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Radiant element, 2400 watt, under Ceran glass cok top needed replacement.
turned off power
removed ceran top from cabinet
removed element
installed new element
replaced top
powered up and was done
removed ceran top from cabinet
removed element
installed new element
replaced top
powered up and was done
Parts Used:
-
GEORGE from NEWNAN, GA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
167 of 254 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hot Burner Light always on
Thermal switch is integral to element and can not be changed, must replace entire element.
Turn off power. Removed front two screws above oven door jamb and lifted the top. Removed the bracket that holds the element against the glass top and removed the element. Moved brackets from old element to new one, aligning to same numer ... Read more ical position and then moved wiring to new element. Slide new element under bracket and reinstalled single screw. Replaced top and screwed down. Turn on power and test .
Turn off power. Removed front two screws above oven door jamb and lifted the top. Removed the bracket that holds the element against the glass top and removed the element. Moved brackets from old element to new one, aligning to same numer ... Read more ical position and then moved wiring to new element. Slide new element under bracket and reinstalled single screw. Replaced top and screwed down. Turn on power and test .
Read less
Parts Used:
-
Gregory from Cary, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
107 of 152 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!