Back
Back
Keep typing for more specific results...
Models > GTH2250XPA > Instructions

GTH2250XPA Husqvarna - Instructions

All Instructions for the GTH2250XPA
1 - 3 of 3
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Wheel bushings were bad
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side.
Parts Used:
Lawn Mower Ring Clip Lawn Mower Axle Hub Cap
  • Anthony from OLIVEHILL, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
22 of 36 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front wheels, too much end play
Shimmed the wheels out on axle.. No more slop.
Parts Used:
Lawn Mower Washer
  • Frederick from BINGHAMTON, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
10 of 35 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GTH2250XPA
1 - 3 of 3