Parts That Fix General Electric Refrigerator GTS18GBEJRWW Noisy

This compression ring is meant to hold the evaporator fan motor in place in the freezer compartment of your refrigerator. This is is a genuine OEM part. The tools needed to complete this repair are a Phillips screw driver and small flat blade screw driver. Be sure to turn off your refrigerator before removing the evaporator fan cover so the fan does not turn on during repair. It is recommended to check the grommets, evaporator fan, and fan blades during repair in case they also need replacning. The compression ring may need replacing if the fan is noisy, or the refrigerator compartments are too warm. This part is sold individually.

The lid bumper or evaporator fan motor bumper in your refrigerator prevents the fan motor from scraping against the side bracket. If your refrigerator/freezer is noisy, the bumper could be worn down or missing, and the sound could be a result of the motor scraping the side bracket. You will find it between the fan motor and the side bracket on the evaporator fan motor assembly. To access the bumper, you will need to remove the evaporator fan motor assembly from the freezer. This part is made of orange rubber and is less than half an inch in diameter. It has a rounded top and a slightly pointed bottom, and is sold individually.

The condenser fan blade assembly helps to regulate the temperature in your refrigerator or freezer. This fan assembly has 4 blades, but other fans may have 3 blades, so be sure to check the number of blades on your fan. The fan blade is made of white plastic and is approximately 6 inches in diameter. If your freezer section is too warm, or you notice a strange noise coming from your refrigerator when it is running, you may need to replace the condenser fan blade assembly. This part is sold individually.

Upgrade your refrigerator's cooling efficiency with the GE Evaporator Fan Blade. This essential component circulates air through the evaporator fins and interior compartment, greatly improving your refrigerator's ability to stay cool. Before installing this crucial part, ensure that all perishable food is safely stored and that the refrigerator is unplugged. For personal safety we recommend wearing work gloves during the installation process. This product is exclusively designed for GE refrigerators. Keep your refrigerator running in optimal condition with this expertly crafted evaporator fan blade.

Introducing the GE MOTOR COND FAN, an essential component for your refrigerator. This sturdy condenser fan motor plays a crucial role in your appliance's cooling system. It powers the fan blade to channel air across the condenser coil. Before installing the motor, remember to disconnect your refrigerator and safely store perishables. It is recommended to don work gloves to shield your hands during the process. Invest in the GE MOTOR COND FAN today to guarantee efficient operation of your refrigerator.

This defrost timer will cycle for 25 minutes after every six hours of run time. The timer itself is made of plastic, and its terminals are bent, the leads are internal, and the label is orange. If you notice that your fridge is too warm, the fridge is running for a long time or is leaking, it could be due to the defrost timer becoming inactive. The defrost timer is found underneath the light cover (may need to remove lightbulb) and will need to be removed along with the air inlet assembly and housing.