JGC4430BDW14 Jenn-Air Cooktop - Overview
Sections of the JGC4430BDW14
[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Refrigerator Screw
PartSelect #: PS11742240
Manufacturer #: WP400021-1
Sold individually.
$11.95
In Stock
Dryer Screw
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$7.95
In Stock
Knob
PartSelect #: PS11744701
Manufacturer #: WP7733P382-60
Sold individually. This knob accepts a D-shaped shaft.
$9.95
In Stock
Range Grommet
PartSelect #: PS11744194
Manufacturer #: WP74007705
This part is the replacement grommet for your cooktop or range. It is made of black plastic and is approximately 1 ¼ inches in diameter. This part may also be known as the cooktop burner knob gasket, ...
$8.95
In Stock
Burner Grate - Gray
PartSelect #: PS11744603
Manufacturer #: WP7518P465-60
This grate is used for gas range/cooktop. Grate is sold individually. This is the grate that sits over the burner for your pots and pans to rest on while cooking.
No Longer Available
Range Medium Burner Cap
PartSelect #: PS11744211
Manufacturer #: WP74007925
This Medium Surface Burner Cap is a genuine OEM part designed for Whirlpool appliances. This part is primarily used for ranges, fitting accurately on top of the burner head. The cap is intricately man...
$67.53
In Stock
Knob
PartSelect #: PS11744700
Manufacturer #: WP7733P381-60
Sold individually. This knob accepts a D-shaped shaft.
$20.95
In Stock
Burner Grate
PartSelect #: PS11744602
Manufacturer #: WP7518P464-60
Sold individually.
$104.92
Special Order
Range Burner Head 12k
PartSelect #: PS11754345
Manufacturer #: WPW10406797
This part distributes flame evenly to your cookware.
$52.47
In Stock
REGULATOR
PartSelect #: PS12070643
Manufacturer #: W11087445
Introduce the remarkable REGULATOR from Whirlpool, specially designed for enhancing the performance of your cooktop. This authentic OEM part is crafted to regulate the flow of either Natural or LP gas...
$118.29
In Stock
Orifice Holder w/ Spark Igniter
PartSelect #: PS11744613
Manufacturer #: WP7527P028-60
Discover the Orifice Holder with Spark Igniter, a genuine OEM product that enhances the functionality of your Whirlpool appliances. This is specifically designed as a Right Front Orifice holder with a...
$54.01
On Order
Questions And Answers for JGC4430BDW14
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the JGC4430BDW14
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
My cooktop knob melted
I had used a pan too large for the middle burner - result: melted knob. Just pulled the old one off (up and straight) and then pushed the new one down firmly. Make sure the indicator line is pointing at you, so the flat side of the spindle matched the flat side of the hole on the knob. Easy peasy.
Parts Used:
-
Anna from MONROVIA, CA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
9 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
black dirty burner grates
-
Carolyn from St. George, UT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
14 of 31 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No ignition
First I drilled out the screws on the burner as they were fused. I opened the stove top cover to access the underside of the burner. Removed the orifice holder, by disconnecting the gas line with a line Wrench and the electric cord.
The trick is to be careful with the gas line. Also when you go to replace the orifice holder ... Read more you will notice that the holes are not threaded. The metal is soft and you're supposed to just screw the screws into the holes and let them bite into the metal. Then you reattach the gas on the electric and put the stove top back together.
The trick is to be careful with the gas line. Also when you go to replace the orifice holder ... Read more you will notice that the holes are not threaded. The metal is soft and you're supposed to just screw the screws into the holes and let them bite into the metal. Then you reattach the gas on the electric and put the stove top back together.
Read less
Parts Used:
-
RAM from SAN DIEGO, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!