JGSP30GER1BG General Electric Range - Overview
Sections of the JGSP30GER1BG
[Viewing 5 of 5]Keep searches simple, eg. "belt" or "pump".

Range Door Lock And Switch Assembly
PartSelect #: PS2577623
Manufacturer #: WB49T10020
Enhance the functionality of your GE range with this Oven Door Lock Assembly. Primarily designed to provide additional safety, this component locks the oven door during the self-cleaning cycle, helpin...
$133.81
In Stock

Surface Burner Igniter
PartSelect #: PS231317
Manufacturer #: WB13K5058
This igniter is used to light the top surface burner on a range/stove. Sold individually.
No Longer Available

CLOCK/OVEN CONTROL (ALSO ORDER CLOCK PLATE ITEM 18 OR 18A)
PartSelect #: PS238230
Manufacturer #: WB27K5187
No Longer Available
Questions And Answers for JGSP30GER1BG
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Heat come up about 150 degrees and stop.
I removed the whole unit out by pulled the plug at the bottom and pulled the unit out, unplug the power cord , turn the gas line off, separate gas line from the stove. I pulled the unit out to have more room for me to work on it. I took the top part out and right hand side panel out. Now you can see the old clock/oven control (ERC II
... Read more
C). I wrote down the color of wire to the lettering on the controller board. I pulled the wires out from the old one. Then I put wires back to the new clock/oven control. I reinstalled and put the gas line back and plug in power cord. I test the unit. It is work very fine.
Read less
Parts Used:
-
Nopadon from Arden, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers
20 of 30 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!