JV565C3CC General Electric Range Hood - Overview
Sections of the JV565C3CC
[Viewing 2 of 2]Keep searches simple, eg. "belt" or "pump".

Filter Spring Kit
PartSelect #: PS223980
Manufacturer #: WB02X10704
This kit comes with 3 filter springs, an alcohol prep swab and installation instructions.
No Longer Available

Non-Duct Filter Kit
PartSelect #: PS223984
Manufacturer #: WB02X10708
This filter is used for the non-duct recirculation vent.
No Longer Available
Manuals & Care Guides for JV565C3CC
Click to downloadQuestions And Answers for JV565C3CC
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The plastic filter springs which held the washable filters broke
I completely removed the remaining pieces of plastic spring, cleaned the entire area with 409, let that dry and then used the alcohol wipe to remove any remaining residue. Peeled off the backing of the metal three springs, positioned them over the rivets that previously held the plastic springs, pushed them onto the rivets and held them
... Read more
in place for about 30 seconds until the adhesive worked. Left the filters out for about an hour and then slipped them into place. Everything worked as it was designed.
Read less
Parts Used:
-
Frances from Charlotte, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
12 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!