The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking,...
$10.03
In Stock
Order within the next 8 hrs and your part ships today!
The tine row on your dishwasher rack divides the rack into columns to keep your kitchen items in place during the washing cycle. If you notice that one or more of the tines on your current tine row is...
$67.19
In Stock
Order within the next 8 hrs and your part ships today!
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
$11.77
In Stock
Order within the next 8 hrs and your part ships today!
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
$11.09
In Stock
Order within the next 8 hrs and your part ships today!
This part has a swivel gooseneck fitting and that allows it to be installed closer to the wall. This part has a 3/4" hose thread on one side and a 3/8" copper tubing on the other side.
$23.37
In Stock
Order within the next 8 hrs and your part ships today!
This heating element is a genuine OEM replacement sourced directly from the original manufacturer for use in various models of dishwashers. The element is designed to heat water inside the dishwasher ...
$64.04
In Stock
Order within the next 8 hrs and your part ships today!
Order within the next 8 hrs and your part ships today!
Questions And Answers for KDTM404KPS0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
11 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
March 15, 2023
I want to buy more of the upper rack wine glass holders. This model came with only two. I can't find them in your catalog.
For model number KDTM404KPS0
Hello John, thank you for contacting us. The compatible stemware clip for your model is part number PS16555333. If you need help placing an order, customer service is open 7 days a week!
Middle spray arm will not stay attached to washer arm assembly piece. 1. Is there a washer or ring to attach it OR do I need to get 2. complete washer arm assembly W11545334 or 3.retainer W1092835?
For model number KDTM404KPS0
Hello Linda, Thank you for writing. The clips that hold the arm to the rack are only sold as part of the Manifold/Spray Arm assembly, PartSelect Number PS16555324. The manifold will need to be replaced. We hope this helps!
on the 2 arms on top rack have plastc connector that is broken
For model number KDTM404KPS0
Hi Vic, thank you for reaching out. We have researched and found the adjuster arm clip, part number PS16660611, for your model. We hope this is what you were looking for!
Hello Adam, thank you for getting in touch. The first thing to do is try to reset the dishwasher. Select any 3 buttons on the control panel other than start/cancel. Press them in this order "1, 2, 3, 1, 2, 3, 1, 2, 3". If you press the buttons quickly (less than half a second between each push), all the lights should turn on the control panel. Wait 10 seconds, then press cancel enough times until all the lights go out on the control panel to reset the dishwasher. Now try the dishwasher again. If the clean light still stays on, the touchpad and control panel, part number PS12745443, needs to be replaced. Glad to be of help!
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!
After pulling the dishwasher out, I was able to determine the leak was occurring around the plastic nuts on the end of the heating element. I removed the heating element and saw that even though there were washers on the ends that protruded through the backside of the machine, they really weren't sealing the holes the element was sticking
... Read more through. Looking at YouTube videos on the installation procedure, I noticed the element being installed had a sort of metal grommet permanently affixed to each end and the rubber washers were between the grommet and the dishwasher body. I ordered the new part and saw this to be when I received the new part. This grommet allowed the washer to seal the hole, once the plastic nuts were installed on the backside of the dishwasher. This seems to have stopped the leak. I don't know how the original part ever worked correctly, since the washers freely sat on the element with nothing to force them up against the body of the dishwasher and seal the holes. It may have been leaking long before I discovered the problem.