KECC506RBL02 KitchenAid Cooktop - Overview
Sections of the KECC506RBL02
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".

Range 6 Inch Element w/Limiter
PartSelect #: PS11764915
Manufacturer #: W10823711
This is a radiant surface element with limiter, and it works in conjunction with your range. The function of this part is to give heat to the surface directly above it, on cooking area stove top.This ...
$124.21
In Stock

Range Cleaner
PartSelect #: PS3492527
Manufacturer #: W10355051
This bottle of non-abrasive cooktop cleaner breaks down and gets rid of the hardest baked-on stains and residue without causing any harm to your appliance. The bottle is 10 oz and does not require a l...
$14.95
In Stock

Radiant Surface Burner Element
PartSelect #: PS11764909
Manufacturer #: W10823699
This surface element is made for under glass set-ups and supplies the heat to a cooking area on top of the range. It has an outside diameter of approximately 7 inches (1500 watts), and is a genuine OE...
$93.60
In Stock

Range 6 Surface Element Infinite Switch
PartSelect #: PS11740892
Manufacturer #: WP3191049
This switch controls the stove top surface burner.
$75.83
In Stock

Refrigerator Screw
PartSelect #: PS11740992
Manufacturer #: WP3196557
Sold individually.
$7.95
In Stock

Range Dual Burner Control Switch
PartSelect #: PS11742653
Manufacturer #: WP4456027
This switch controls the stove top surface burner.
$77.65
In Stock

Control Knob
PartSelect #: PS11745703
Manufacturer #: WP8286096BL
This knob is sold individually.
$22.95
On Order

Range Bracket Burner
PartSelect #: PS11742699
Manufacturer #: WP486579
Sold individually.
$8.95
Special Order

SEAL-SWTCH
PartSelect #: PS338210
Manufacturer #: 3183956
This seal switch cover is an OEM replacement component engineered for use in select cooktops and ranges. Its primary function is to form a protective barrier over the burner switch assembly, effective...
$49.34
In Stock
Manuals & Care Guides for KECC506RBL02
Click to downloadInstall
Installation Instructions
(1.87MB)
Install
Installation Instructions
(0.38MB)
Manual
Owner's Manuals
(1.15MB)
Manual
Owner's Manuals
(3.24MB)
Questions And Answers for KECC506RBL02
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Luis
February 15, 2023
TOP RIGHT DUAL HEATING ELEMENT FROM TOP OF COOK TOP 8"
For model number KECC506RBL02
Hi Luis, thank you for contacting us. We have researched and found the part you are looking for in your model is PS11764909. Please contact us anytime if you require further assistance!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Common Symptoms of the KECC506RBL02
[Viewing 2 of 2]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Right rear burner went bad
Turned the breaker off, I removed 2 screws securing the range top to the range, opened the top and secured it in the up position, Removed the 2 screws securing the element ,one at a time I swapped the quick connectors from the old element to the new and repeated the process in reverse. I save over $100.00 in labor, plus most companies get
... Read more
you for a trip charge. It was easy!!
Read less
Parts Used:
-
Mark from Loxahatchee, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
149 of 176 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hot Burner Light always on
Thermal switch is integral to element and can not be changed, must replace entire element.
Turn off power. Removed front two screws above oven door jamb and lifted the top. Removed the bracket that holds the element against the glass top and removed the element. Moved brackets from old element to new one, aligning to same numer ... Read more ical position and then moved wiring to new element. Slide new element under bracket and reinstalled single screw. Replaced top and screwed down. Turn on power and test .
Turn off power. Removed front two screws above oven door jamb and lifted the top. Removed the bracket that holds the element against the glass top and removed the element. Moved brackets from old element to new one, aligning to same numer ... Read more ical position and then moved wiring to new element. Slide new element under bracket and reinstalled single screw. Replaced top and screwed down. Turn on power and test .
Read less
Parts Used:
-
Gregory from Cary, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
107 of 152 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
glass cooktop element stopped working
3 months after my 5 year warranty ran out, one of the elements on my wife's maytag cooktop "popped". I was curious to see if I could fix it myself and ran across partselect.com via google. Their step by step instructions for determining the source of the problem (i.e. either the element or the control was bad) led me to realize that the
... Read more
element was bad. I ordered a new one -- which arrived in 3 days! It was very easy to replace the element, since I had already taken the glass cooktop off of the range during the testing phase. Thanks partselect.com!
Read less
Parts Used:
-
Mark from mckinney, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Socket set
33 of 39 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!