KUIX535HPA02 Whirlpool Ice Maker - Overview
Sections of the KUIX535HPA02
[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Refrigerator Switch
PartSelect #: PS12584655
Manufacturer #: W11291138
This is a light switch for your refrigerator. It activates when the door of your appliance is opened, and it will turn the light inside on and off. You will need to replace this part is if your light ...
$27.95
In Stock
Dishwasher Screw 818 X 5/8
PartSelect #: PS11747050
Manufacturer #: WP9741232
Sold individually.
$7.95
In Stock
Ice Maker Bin Temperature Sensor
PartSelect #: PS11755842
Manufacturer #: WPW10511923
This bin temperature sensor is for ice makers.
The bin temperature sensor monitors the temperature in the ice maker bin and sends the temperature reading to the electronic control board.
Disconn...
$51.95
In Stock
Refrigerator Screw
PartSelect #: PS11745622
Manufacturer #: WP8281196
Sold individually.
$9.95
In Stock
Water Distributor Tube
PartSelect #: PS11738017
Manufacturer #: W10863947
The water distributor tube distributes water from the reservoir to the evaporator plate.
$47.20
In Stock
Refrigerator Single Hex Head Screw
PartSelect #: PS11742731
Manufacturer #: WP489069
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
$7.95
In Stock
Condenser Fan Motor
PartSelect #: PS16744942
Manufacturer #: W11613295
This is a condenser fan motor for your refrigerator/freezer. This fan motor is most commonly used with frost-free refrigerators with a condenser coil. It controls the rotation of the condenser fan bla...
$61.33
In Stock
Ice Maker Scoop
PartSelect #: PS12745542
Manufacturer #: W11420408
This ice maker scoop is an OEM refrigerator part designed to retrieve ice from the ice maker bin. It is made of plastic and measures approximately 10 3/4 inches in length and 4 inches in width. The sc...
$16.95
In Stock
Water Inlet Valve
PartSelect #: PS11765823
Manufacturer #: W10897719
This water inlet valve supplies water to the ice maker, allowing it to fill the reservoir and produce ice. If your ice maker is not filling correctly or is experiencing water flow issues, replacing th...
$129.93
In Stock
Ice Maker Screw
PartSelect #: PS11741613
Manufacturer #: WP3400884
Screw size is 8-18 x 5/8". Used with stand-alone ice cube makers.
$7.95
In Stock
PUMP
PartSelect #: PS16555297
Manufacturer #: W11542867
This circulation pump helps form ice by circulating water over the evaporator plate. Designed for select ice makers, it ensures reliable performance.
$131.18
In Stock
Questions And Answers for KUIX535HPA02
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the KUIX535HPA02
[Viewing 6 of 6]Light not working
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Fridge too warm
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Fridge and Freezer are too warm
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Door switch module wore out
Pull out old module...
Remove 2 wires...
Tape to inside wall [don't want them to fall down into side panel]..
Order new switch..
Fed Ex pkg came on 2nd day..
Install wires on switch...
Press into opening...
Check door light on..[OK]
.. Done
Remove 2 wires...
Tape to inside wall [don't want them to fall down into side panel]..
Order new switch..
Fed Ex pkg came on 2nd day..
Install wires on switch...
Press into opening...
Check door light on..[OK]
.. Done
Parts Used:
-
Fred from Oceanport, NJ
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
40 of 55 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water not refilling after initial batch of ice
The water filled on startup (actually over-filled, which was a clue). After that water was used to make ice, no new water came in so the recirculation pump just made whining noises in the mostly empty reservoir. Since water could come in (on start up) I reasoned it wasn't the water inlet valve, and everything else suggested the ice maker
... Read more
was getting inaccurate info about how much water was in the reservoir. Turns out, the water recirculation pump has a water level sensor built in. So while the pump itself still functioned, the water level sensor inside had gone bad. Replacing the pump fixed the issue. There are videos online that show how to accomplish that, but it was pretty straight-forward. The dis-assembly was sometimes irritating because it's hard to see and maneuver around inside. It'll help if you put the machine closer to eye level. Pay close attention to videos that show the disassembly because there are a couple of tabs that are hard to find.
Read less
Parts Used:
-
Jonathan from WILLIAMSBURG, VA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
14 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice bin overfilling
I'm an hvac/r technician, and regularly work on ice machines. Begin my pulling the white over beneath the control panel. It snaps in place so pull on the bottom then left out. 1/4 nut driver is all you need, and remove the screw holding the bin thermistor clip to the side. Up to the right , beneath the control panel, behind the plasti
... Read more
c panel you previously removed is the mollex connector. Unplug the thermistor and follow instructions in reverse to reinstall.
Read less
Parts Used:
-
Travis from N CHESTERFLD, VA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
15 of 20 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!