LW1815HR (00) LG Air Conditioner - Overview
Sections of the LW1815HR
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Fan Assembly,Axial
PartSelect #: PS3528610
Manufacturer #: 5900AR1508B
This fan assembly or also known as a condenser fan blade is used in air conditioners. The blade fits onto the motor shaft and distributes air over the condenser to cool the refrigerant before it goes ...
No Longer Available
Clamp,Spring
PartSelect #: PS3522763
Manufacturer #: 3H02932C
The fan blade clamp, also known as a clamp spring, are for air conditioners. The clamp supports the fan blade on the motor shaft. When the motor is running, it signals the shaft to turn and rotate, bu...
No Longer Available
Air Conditioner Installation Kit
PartSelect #: PS7788179
Manufacturer #: AET73371401
The installation kit contains the hardware you need to install the room air conditioner in a window. The kit also includes the accordion filler panels, installation brackets and seal.
$85.02
In Stock
Questions And Answers for LW1815HR
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the LW1815HR
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The a/c compressor would run continuously even when turned off
Unplug the unit next remove the front grill/ filter assembly notice screw on each side and one inside. Lift the bottom out it has clips on each side it takes some effort to remove. Next remove the temperature sensor pull it out from the evaporator. Next remove screws the display control pull it out and remove connecting link to the vent b
... Read more
lades that can be pryed with flat blade screw driver. Next remove screws holding the silver box that contains the pcb assembly pull it out the bottom may have to be pried up and pull over edge. Once the box is out as far as the wires allow open the box by bending it open enough to access the wiring and the pcb assembly. Next take pictures of the inside of the box a lot of pictures it will help you to reconnect all the wires correctly take your time once the replacement is complete reinstall the box back in reverse order then reinstall the grill and filter assembly. Next plug in cord push the on button and unit should work as designed. I hope this helps
Read less
Parts Used:
-
William from GAINESVILLE, TX
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken fan assembly
everything went great and was just as planned. We now have cool air in the shop for us to do our handy work. Thanks, Dale Heltzel
Parts Used:
-
Drucilla from Vinita, OK
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
1 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!