EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Keep typing for more specific results...

MED6000XR1 Maytag Dryer - Overview

Sections of the MED6000XR1

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Dryer Drum Support Roller – Part Number: WPW10314173
Dryer Drum Support Roller
★★★★★
★★★★★
(40)
PartSelect #: PS11752609
Manufacturer #: WPW10314173
This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. This part is sold separ...
$18.88
  In Stock
Order now and your part arrives in 2-3 business days!
Dryer Thermostat Internal bias – Part Number: WP8577274
Dryer Thermostat Internal bias
★★★★★
★★★★★
(35)
PartSelect #: PS11746740
Manufacturer #: WP8577274
The internal-bias thermistor (Thermistor, Dryer Thermister, Dryer Thermistor) prevents the dryer from overheating by monitoring and controlling the temperature of the inside of the dryer drum. It is l...
$35.67
  In Stock
Order now and your part arrives in 2-3 business days!
Dryer Tri Ring – Part Number: WPW10512946
Dryer Tri Ring
★★★★★
★★★★★
(5)
PartSelect #: PS11755850
Manufacturer #: WPW10512946
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
$10.95
  In Stock
Order now and your part arrives in 2-3 business days!
Washer Leveling Foot – Part Number: 49621
Washer Leveling Foot
★★★★★
★★★★★
(13)
PartSelect #: PS1609293
Manufacturer #: 49621
If your washer shakes or vibrates loudly when it reaches its max speed, check that the leveling legs are even. To ensure that the washer is firmly on the ground using all four legs, adjust the legs so...
$7.29
  In Stock
Order now and your part arrives in 2-3 business days!
Idler Pulley w/Bracket – Part Number: W10837240
Idler Pulley w/Bracket
★★★★★
★★★★★
(46)
PartSelect #: PS11726337
Manufacturer #: W10837240
The idler pulley with bracket ensures proper tension on the dryer’s drive belt, allowing the drum to spin effectively. This assembly includes the pulley and arm, making it ideal for replacing a worn o...
$27.24
  In Stock
Order now and your part arrives in 2-3 business days!
Dryer Heater Element (240v) – Part Number: WP8544771
Dryer Heater Element (240v)
★★★★★
★★★★★
(52)
PartSelect #: PS11746337
Manufacturer #: WP8544771
The 5400W, 240-volt heating element is supplied directly by the manufacturer for use in various models of dryers. It is responsible for generating the heat needed to dry your laundry effectively. It i...
$85.36
  In Stock
Order now and your part arrives in 2-3 business days!
Dryer Electrode Sensor – Part Number: WP3387223
Dryer Electrode Sensor
★★★★★
★★★★★
(15)
PartSelect #: PS11741408
Manufacturer #: WP3387223
This is the moisture sensor for your dryer. It helps detect the amount of moisture in your clothes during the dryer cycle. If you notice your clothes are still wet after an automatic dryer cycle is do...
$9.95
  In Stock
Order now and your part arrives in 2-3 business days!
Dryer Heating Element Wire Kit – Part Number: 279457
Dryer Heating Element Wire Kit
★★★★★
★★★★★
(4)
PartSelect #: PS334206
Manufacturer #: 279457
This kit is used for electric clothes dryers, and it comes with a yellow wire nut.
$9.95
  In Stock
Order now and your part arrives in 2-3 business days!
Dryer Screw – Part Number: WP90767
Dryer Screw
★★★★★
★★★★★
(2)
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$7.95
  In Stock
Order now and your part arrives in 2-3 business days!
Drum Seal w/Adhesive – Part Number: 280114
Drum Seal w/Adhesive
★★★★★
★★★★★
(21)
PartSelect #: PS970088
Manufacturer #: 280114
This drum seal with a silicone rubber adhesive is used in dryers. This part seals the drum to make sure air does not escape from the dryer. If your dryer is making loud noises, is not producing enough...
$42.95
  In Stock
Order now and your part arrives in 2-3 business days!
Dryer Screw 1016 X 1 – Part Number: WP3387230
Dryer Screw 1016 X 1
★★★★★
★★★★★
(2)
PartSelect #: PS11741409
Manufacturer #: WP3387230
This screw is sold individually.
$8.37
  In Stock
Order now and your part arrives in 2-3 business days!
Hinge – Part Number: WPW10208415
Hinge
★★★★★
★★★★★
(27)
PartSelect #: PS11750410
Manufacturer #: WPW10208415
This is a door hinge, which allows for your washer door to properly shut during the washing cycle, and open after it is finished. If your door hinge is bent or broken and not allowing the door to shut...
$80.42
  In Stock
Order now and your part arrives in 2-3 business days!

Questions And Answers for MED6000XR1

Be the first to ask our experts a question about this model!

Common Symptoms of the MED6000XR1

[Viewing 11 of 11]
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not Heating
Fixed by
these parts
Fixing Fixing Fixing
Show All
Too hot
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Marks left on clothes
Fixed by
these parts
Fixing Fixing
Show All
Lid or door won’t close
Fixed by
these parts
Fixing Fixing
Show All
Won’t Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Drum Not Spinning
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door Sags
Fixed by
these parts
Fixing Fixing
Show All
Leaking
Fixed by
these parts
Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Rear tub seal failure
I removed the top cover and then the back cover, released the belt tensioner and removed the drive belt. Then slid the tub out of the unit and onto the back dack. Sanded the remnents of the old seal off. Wiped the tub lip with laquer thinner and applied the "fast" drying glue supplied with the kit. Installed the seal and re-assembled the unit...works fine
Parts Used:
Drum Seal w/Adhesive
  • Jerry from Everett, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
66 of 86 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
worn out part
The repair was fairly easy. The most timely part of the repair was removing the twelve screws from the back panel to expose the repair.
Parts Used:
Dryer Drum Support Roller Dryer Drum Support Shaft WASHER Dryer Tri Ring
  • John from Tucson, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench (Adjustable)
44 of 64 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Unit would shut down in the middle of cycle and flash E1 trouble code
Had to remove the back of unit to access the area of subject part by removeing 12 to 14 screws also the gas line had to be removed. Two screws held the part in place. Unit now runs normal.Saved alot on repair costs!!!!!
Parts Used:
Dryer Thermostat Internal bias
  • Jim from Tucson, AZ
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
30 of 41 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!