The ice maker cube tray holds the water that comes from the ice maker during the process of it becoming ice. This part is white in color and made of plastic. All you will need for this repair is a fla...
This evaporator fan motor is in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated. When the evaporator ...
This sensor cover, also known as the ice maker thermostat cover, is a genuine OEM replacement part for Samsung refrigerators. It is made of durable white plastic and has measurements of approximately ...
This is a refrigerator ice dispenser lever. It is clear and made entirely out of plastic. The function of the ice dispenser lever is to dispense ice when the lever is pushed. If the lever is cracked o...
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Skip
April 25, 2022
Water pooling below bottom drawer of refrigerator side. What would cause this. Model RS277ACBP
For model number RS277ACBP
Hello Skip, Thank you for the question. We suggest checking the Drain Tube for clogs or blockages. You can use a turkey baster and hot soapy water to force the water through and a pipe cleaner to clear any clogs. This tube is to drain the defrost water during the defrost cycle into the drain evaporator pan below the appliance. If clogged, water will pool under the drawers. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Barely losened the two rear screws. Took out the two front screws and the ice maker slides toward front of fridge off the 2 rear screws. Unhooked the wiring plug. Replaced with new ice maker.
Using the putty knife, pry off the faceplate for the ice/water dispenser. Disconnect the wire harness. Using philips head screwdriver, remove the dispenser assembly. Remove the old dispenser and replace. Reverse for reassembly. Note * I should have bought the water dispenser lever and replaced it as well since I had the assembly out.
... Read more Secondary note * be mindful during reassembly to not put pressure on the water dispenser or have a glass handy. :)