RZ4219BF ((96651480100)(2010-01)) Husqvarna Lawn Mower - Overview
Sections of the RZ4219BF
[Viewing 10 of 10]Keep searches simple, eg. "belt" or "pump".

Lawn Mower Hex Head Bolt
PartSelect #: PS9982804
Manufacturer #: 584953901
This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securi...
$3.99
In Stock

Lawn Mower Blade Bolt and Washer Assembly
PartSelect #: PS9020856
Manufacturer #: 532193003
This manufacturer-approved bolt and washer assembly is for lawn tractors.
Wear work gloves to protect your hands when installing this part.
$9.62
In Stock

Lawn Mower Mandrel Assembly
PartSelect #: PS12116539
Manufacturer #: 587820301
This mandrel assembly is for lawn tractors.
Mandrel assembly attaches to the mower deck and spins the blades. The assembly may include multiple parts; refer to your parts diagram for a complete lis...
$58.37
In Stock

Lawn Mower Belt
PartSelect #: PS9288485
Manufacturer #: 539110411
Maintain peak performance in your riding lawn mower or garden tractor with this genuine OEM replacement drive belt, engineered for select Poulan, Jonsered, and Husqvarna models. Supplied directly by t...
$33.15
In Stock

Lawn Mower Push Nut
PartSelect #: PS9285696
Manufacturer #: 532110452
The Push Nut is a black, metal nut, which can be installed with pliers and a hammer. It's used to secure parts in place in various locations on a variety of equipment. If damaged will not longer hold ...
$3.99
In Stock

Stripper Mandrel
PartSelect #: PS17016478
Manufacturer #: 531167701
This genuine replacement mandrel stripper is sourced directly from the original manufacturer and is designed for use with riding lawn mowers and garden tractors. It functions as a mounting bracket bet...
$8.48
In Stock

Lawn Mower Interlock (Clutch) Switch
PartSelect #: PS9288217
Manufacturer #: 539101080
$20.68
In Stock
Questions And Answers for RZ4219BF
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Worn out Mandrel Assemblies
Remove Deck, Remove Blades, Remove guards and belt, use old belt to hold pully to remove pully (would be good to have pully wrench), Remove mandrel Assembly, Install new mandrel assemblies (had to tap the new mandrel assemblies. Should have been done by manufacturer.). Reinstall blades, guards, and belt. Put deck back on.
Parts Used:
-
Joseph from CANBY, MN
-
Difficulty Level:Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Socket set
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!