S3RFBN (ALBEEUS) LG Dryer - Overview
Sections of the S3RFBN
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
BOX ASSEMBLY,LOCAL SOURCING PARTS
PartSelect #: PS12748559
Manufacturer #: CLS30860010
$158.90
In Stock
Questions And Answers for S3RFBN
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the S3RFBN
[Viewing 3 of 3]Noisy
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dishwasher was noisy. PartsDirect suggested replacing circ pump.
Relocated dishwasher to garage and set it up on a table (easier on back having it elevated). Connected temporary water supply, drained to a bucket.
Removed pump, and found it severely corroded, indicating leakage from pump shaft seal in sump. Inspection of seal revealed excessive wear, requiring sump replacement (there is no wa ... Read more y to replace just the pump seal). I have photos of old pump & sump, but I don't see any way to upload them.
Removed sump from dishwasher with all components attached, swapped components over to new sump, reinstalled sump (with new sump gasket) and started dishwasher to check for leaks. The heater was the most difficult component to swap. Reinstalling the sump assembly was tricky.
Reinstalled dishwasher into kitchen cabinet.
Removed pump, and found it severely corroded, indicating leakage from pump shaft seal in sump. Inspection of seal revealed excessive wear, requiring sump replacement (there is no wa ... Read more y to replace just the pump seal). I have photos of old pump & sump, but I don't see any way to upload them.
Removed sump from dishwasher with all components attached, swapped components over to new sump, reinstalled sump (with new sump gasket) and started dishwasher to check for leaks. The heater was the most difficult component to swap. Reinstalling the sump assembly was tricky.
Reinstalled dishwasher into kitchen cabinet.
Read less
Parts Used:
-
Doug from NEWPORT NEWS, VA
-
Difficulty Level:Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
7 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dish washer would shut off mid cycle.
Check the motor and discovered roughness when you turned the shaft. I assume there was a bearing problem. I ordered a new motor from part select and upon the replacement washer is working great! Thanks part select, my part arrived in a timely manner and you guys saved me approx. $500. Thanx again. Richard Sansom
Parts Used:
-
Richard from Camdenton, MO
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!