Models > SRM-1501 > Instructions

SRM-1501 Echo Trimmer - Instructions

All Instructions for the SRM-1501

Couldn't get 'er done with y'all

Had to order from https://www.jackssmallengines.com/ just to get the correct parts we were needing. That's what we get ordering from Canada.

Parts Used:

Trimmer Clutch Assembly

Bearing-Ball 6201

Power Broom Retaining Ring

Trimmer Retaining Ring 32

Wayne from EASTLAND, TX
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Echo trimmer had narrow shield. Bought wider one which reduced rocks and debris

Easiest repair ever. Turn the trimmer upside down so you can access the string assembly. Find the small hole in the shaft beneath the string assembly and insert a heavy gauge nail into it to hold the shat in place. Turn the string assembly counterclockwise until it comes off. Lift off the round metal piece that was under the string assembly.Find the 3 screws holding the shield in place and unscrew them. Pull the shield off. Install the new one in reverse order. I used the original hex screws as the new ones were philips head. Hex worked perfectly. I was amazed how easy thus was to do.

Parts Used: