This is a pulsator cap for various models of Samsung washing machines. This metal cap is designed to fit over the wash plate and agitator mounting bolt, ensuring clothes do not get caught on it during...
This is a water inlet valve designed for Samsung washing machines. Water inlet valves are used to control the hot and/or cold water going into the washing machine, and if it is broken or damaged can c...
This adjustable leg, also known as a levelling leg, is a genuine OEM part supplied by Samsung for use with washing machines. The leg supports the washing machine by ensuring that it is level and balan...
This is the drain pump assembly for various models of Samsung washing machines. The drain pump is used to remove any water from the washer after it has completed its washing cycle. If your washer stil...
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gerard
December 20, 2019
When agitateing makes an grinding noise spin ok
For model number WA48H7400AW
Good Day Gerard. Thank you for your question in regards to your unit (Model Number WA48H7400AW). Based on our research, this sound usually happens as the washer being overloaded with laundry. It is recommended to do smaller loads of laundry which should keep this sound from happening. Hope this helps. Best Regards.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Alonzo
January 26, 2020
Why does my washer use not much water?
For model number WA48H7400AW
Hi Alonzo. The first place to check would be your hoses. Make sure the hoses are not clogged. It may also be the inlet valve PS4220861. Thank you for your question and good luck with your repair.
Hello and thank you for writing.
It certainly sounds like it could be a faulty balancer assembly PS4220945 and/or possibly a malfunctioning pulsator assembly PS8764371 you should check the part(s) for signs of damage and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.
Shut off water and electrical supply to appliance, take water supply hoses off to allow for proper access to back of machine. Take off back panels of appliance. Disconnect two hoses from pump. Take out two screws which attach pump to washer body. Detach wiring which connects pump to control unit ( that takes a little time). Install p
... Read moreump in designated location, connect hoses, connect wiring to control unit, connect appliance to powere source, test run to make sure everything works properly, make final detailed wire connection Pump to control unit, install back panels, Connect water supply hoses .....and be proud of yourself!
Though I could hear and feel the drain pump running, the washer would not drain. This model does not have a filter for the drain pump. I lowered the discharge hose from the stand up pipe on the wall, and lowered it to the floor. Water ran right out, so no blockage in the drain system. After removing the inlet and outlet hoses to the pump,
... Read more a quick inspection showed the impeller on the motor was off the shaft and flopping around. Bingo, motor runs but cant pump. Ordered from Partselect and received in ONE DAY. I really didn't want to go back to it that soon, but they certainly did their part. Ha. Thank you all. Greg