Back
Back
Keep typing for more specific results...

WF337AAGXAC Samsung Washer - Overview

Sections of the WF337AAGXAC

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Washer Door Lock Latch – Part Number: WP8182634
Washer Door Lock Latch
★★★★★
★★★★★
(24)
PartSelect #: PS11745016
Manufacturer #: WP8182634
This part is used on front load washers and includes the interlock switch assembly.
$81.43
  In Stock
Shock Damper – Part Number: DC66-00470A
Shock Damper
★★★★★
★★★★★
(3)
PartSelect #: PS4212219
Manufacturer #: DC66-00470A
This is an individually sold front shock absorber designed for use with Samsung dryers. Shock absorbers are used to distribute the weight of the dryer drum evenly and ensure that the different bumps a...
$69.95
  In Stock
Outer Seal Clamp – Part Number: DC97-04973B
Outer Seal Clamp
★★★★★
★★★★★
(5)
PartSelect #: PS4218211
Manufacturer #: DC97-04973B
This is an outer seal clamp for the washer door boot of your Samsung washing machine. This clamp tightly seals the boot of the drum within the door of the washer to prevent leaks. This clamp is made o...
$12.95
  In Stock
Door Switch Assembly – Part Number: DC64-00519B
Door Switch Assembly
★★★★★
★★★★★
(3)
PartSelect #: PS4210737
Manufacturer #: DC64-00519B
This is a door switch assembly designed for Samsung washing machines. This door switch assembly is used to latch and lock the door shut before the washing cycle commences and communicates with the con...
$41.95
  In Stock
Water Valve – Part Number: DC62-30314K
Water Valve
★★★★★
★★★★★
(2)
PartSelect #: PS4209100
Manufacturer #: DC62-30314K
One solenoid valve for hot water
$84.95
  In Stock
Oil Seal – Part Number: DC62-00156A
Oil Seal
PartSelect #: PS4208679
Manufacturer #: DC62-00156A
$43.95
  In Stock
Bolt Assembly – Part Number: DC97-02412A
Bolt Assembly
PartSelect #: PS4217876
Manufacturer #: DC97-02412A
Assembly BOLT;SWF-P12,MOTOR/
$22.95
  In Stock
Door Glass – Part Number: DC64-00504C
Door Glass
★★★★★
★★★★★
(2)
PartSelect #: PS4210731
Manufacturer #: DC64-00504C
Explore the sturdiness and functionality of the Samsung Washer Door Glass. Fitting perfectly with a set of Samsung Washer models, it is a high-quality door glass, designed with an eye for detail by Sa...
$155.15
  On Order
Washer Tub Gasket Seal – Part Number: DC69-00804A
Washer Tub Gasket Seal
★★★★★
★★★★★
(1)
PartSelect #: PS4213806
Manufacturer #: DC69-00804A
This is a seal for various models of Samsung washing machines. This part acts as a seal for the rear and front outer part of your washing machine tub and is used to prevent any matter of leaks. If you...
$35.95
  In Stock
Water Valve – Part Number: DC62-00142G
Water Valve
PartSelect #: PS4208672
Manufacturer #: DC62-00142G
Three solenoid valve for cold water
$123.95
  In Stock
Washer Door Diaphragm – Part Number: DC64-00802A
Washer Door Diaphragm
★★★★★
★★★★★
(3)
PartSelect #: PS4210920
Manufacturer #: DC64-00802A
Perfect for maintaining the efficiency of your Samsung washer, this full-length Door Boot Seal-Gasket is a crucial appliance part. Crafted from high-quality materials, it's built to last and effortles...
$161.32
  In Stock
Drain Pump – Part Number: DC96-01414A
Drain Pump
PartSelect #: PS4216974
Manufacturer #: DC96-01414A
Assembly PUMP DRAIN;WF337AAW
$192.03
  In Stock

Questions And Answers for WF337AAGXAC

Be the first to ask our experts a question about this model!

Common Symptoms of the WF337AAGXAC

[Viewing 7 of 7]
Lid or door won’t close
Fixed by
these parts
Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Leaking
Fixed by
these parts
Fixing Fixing
Show All
Shaking and Moving
Fixed by
these parts
Fixing
Show All
Locking Issues
Fixed by
these parts
Fixing
Show All
Door latch failure
Fixed by
these parts
Fixing
Show All
Will not drain
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
front load washer latch replacement
1. remove the three screws from the top backside of the top panel
2. push the top panel to the rear 1/8 to 1/4 inch
3. lift/rotate top panel from rear to front, set aside.
4. remove the three wire connectors from latch.
5. use #15 Torx to remove the three screws from the latch.
6. remove and replace part using top opening.
7. reverse order to finish.
Parts Used:
Washer Door Lock Latch
  • James from Vilonia, AR
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
196 of 238 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door lock was in the locked position and door could not close
I bought a new door lock for 132 dollars (item number PS2037196).

Ultimately you have to get to the inside of the machine where the door lock is located in order to see if you will need this door lock that I bought.

DISCONNECT POWER FROM MACHINE.

First take off the top by taking off the 2 screws on the back of the machine.

Second take off the control panel, I believe there are about 5 or 6 screws for that.
(there's also a screw when you open up the detergent compartment on the bottom left- also, a lever must be pushed in order for the compartment to come off- it MUST be taken off).

Third unscrew the top of the front white plate.. there should be a 5 or 6 screws for that.
You don't need to take off the entire front plate.

Finally unscrew 3 screws that hold the door lock in place .. make sure your hands is in the machine- the back of door lock to catch the lock when you're on the last screw.

Gently take out the door lock from the side with the cables attached by holding the white metal door open (it bends).

Try to pull on the bottom of the door lock (its a manual release). If it doesn't release you need to buy a new door lock like I did... if it does release then you don't need a door lock and just reassemble.
(Note: You can also try plugging in the machine and THEN pulling down on the manual release. When I tried this the door lock just vibrated and nothing happened so I bought a new door lock.)

If you have the new door lock continue here:

Take out all 3 cables on the old door lock by pressing on the corresponding clips.

Attach the new door lock with the correct cables. Assemble machine back together.

Thats it.
Parts Used:
Washer Door Lock Latch
  • Suryakant from Cortlandt Manor, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
66 of 73 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Washer became unbalanced and broke the latch on door
Had to take the entire front of the washer off to replace the door latch.
Parts Used:
Washer Door Lock Latch
  • Glenn from Las Vegaas, NM
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
30 of 39 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!