Parts That Fix Whirlpool Refrigerator WRF535SMBM00 Frost buildup
The p-trap drain tube kit may also be known as the duck bill, or the drain pipe, and it is compatible with your refrigerator. The function of the p-trap drain kit is to carry the water that has formed during the defrost cycle to the bottom of the refrigerator, where your drain pan is located. The tools you will need for this repair include a 1/4-inch nut driver and a small flat-blade screwdriver. To do this repair you will need to pull the refrigerator forward in order to reach the lower access panel at the back. This kit includes the tube extension piece and spacer.
This door gasket is used to seal the freezer door when closed.
The electronic control board is used in refrigerators to monitor and manage the temperature settings, such as cooling or defrosting times. If your fridge or freezer is too warm, too cold, is not defrosting, will not start, and/or runs too long then replacing the control board could solve your appliance problem. The tools needed for this installation project is a small flat blade screwdriver. *Please note: the board will need to be programmed after installation. Remember to unplug refrigerator from power source as a safety precaution. Refer to the manual provided by the manufacturer for further installation instructions and accurate guidance.
The freezer door gasket is white in color.
This long harness thermistor kit is what helps monitor and regulate the temperature inside your refrigerator. It can be located in either the freezer compartment near the evaporator coils or in the fresh food compartment near the airflow channels, depending on the model. If you notice issues like excessive icing in the freezer, inadequate cooling in the refrigerator, temperature fluctuations, or error messages on the display panel, it indicates a potential problem with the thermistor. Since your fridge will not be able to maintain the desired temperature, this results in food spoilage, inefficient cooling, and potential damage to the cooling components. To replace the thermistor, disconnect it from the connector plug or wiring harness and remove any mounting brackets or clips using a screwdriver if necessary. Remember to consult your user manual to determine the required number of thermistors, as they are sold individually as OEM replacement parts.
These parts will attach to your drawer rail and are used to help the drawer glide smoothly.
This freezer wire harness with defrost thermostat is a genuine Whirlpool replacement part designed to help keep your refrigerator running smoothly and efficiently. It works to supply power to the critical electrical components within your fridge. Please take care to verify that this part is correct for your model before ordering, as slight variations in size and shape can occur. Prior to installation, be sure to unplug the refrigerator for safety and wear work gloves to protect your hands. It is also advised to temporarily store perishable food items elsewhere to avoid spoilage. Trust in Whirlpool to help keep your refrigerator in peak condition.