Parts That Fix Whirlpool Refrigerator WRF535SMBM00 Ice maker won’t dispense ice
This is an ice maker assembly for various models of refrigerator. This ice maker assembly is used to freeze and eject ice into the ice bucket, then dispense the ice. This ice maker comes with the necessary shut-off arm, as well as a wire harness to properly install it into the freezer compartment of your refrigerator. If your current ice maker is either not producing ice or not breaking the ice up properly, it will need to be replaced. This ice maker assembly is an OEM part and is sold on its own, without any other parts or accessories.
The ice maker thermostat, also known as the cycling thermostat, controls and regulates the ice maker ejection cycle by monitoring the temperature inside the freezer to determine when to release the ice into the bin and start the ice making cycle again. If your ice maker is making unusual noises, or if the ice maker is not making or dispensing ice, there could be an issue with the thermostat. Before you begin this repair, make sure the power is disconnected from your refrigerator, and that any food that may spoil is safely stored. This is an OEM part and is sourced directly from the manufacturer. This thermostat is sold individually, and comes with two attachment clips.
The water inlet valve is a crucial component in refrigerators, responsible for supplying water to the ice maker and water dispenser. It controls the flow of water from the household supply line, ensuring that the right amount is delivered to the refrigerator's internal systems. If the water inlet valve becomes faulty, you may notice issues such as slow water dispensing, no ice production, or leaking near the back of the refrigerator. Replacing a malfunctioning valve can restore proper water flow and prevent further damage. For installation, first unplug the refrigerator and turn off the water supply. The valve is typically located at the back of the appliance, where the water line connects. Remove the faulty valve, reconnect the water line to the new part, and secure it in place. Once installed, restore power and test for proper operation.
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light when your fridge door is open, and to make sure it is off when your refrigerator door is closed. The reason you would need to replace this part is if your light is not turning on when your door is open. For this repair, you will need a putty knife, and a small flat-blade screwdriver.