Parts That Fix Whirlpool Refrigerator WRF757SDHZ02 Ice maker won’t dispense ice

This part is a replacement refrigerator drive shaft seal for your refrigerator. The drive shaft seal protects the auger motor from water and condensation that may leak down the drive shaft from the ice bucket. If the seal is broken, water and condensation can get in, causing the ice maker to fail. To replace the seal, first remove the ice bucket from your freezer. Then remove the two screws on the drive shaft holder, and use a pair of pliers to remove the drive shaft. At this point you can remove the seal from the drive shaft. Be sure to clean the area that the seal sits in before you reinstall the drive shaft. This part is white in color and is about an inch in diameter. The seal is sold individually.

This auger motor is for refrigerators. Auger motor turns the auger that pushes the ice cubes through the dispenser chute. Safely store any food that could deteriorate while the power is off. Unplug the refrigerator before installing this part. Wear work gloves to protect your hands.

This ice container, also known as an ice bucket or ice bin, is an authentic OEM part that is designed to fit with refrigerators. It consists of a white base attached to a transparent plastic dish with a metal rod in the center known as an auger. It is where produced ice is collected and stored. The container serves as a reservoir for the ice and allows for convenient access to ice cubes or crushed ice whenever needed. It also prevents the ice from scattering throughout the freezer compartment. If you notice water leakages, visible damage on the ice container, experience difficulties dispensing ice, or notice ice clumping together in large masses, then you will likely need to replace the container.

The ice maker includes the ice mold and the control device. The ice maker receives water from the water inlet valve and then holds the water in the ice mold until the water freezes solid.

This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light when your fridge door is open, and to make sure it is off when your refrigerator door is closed. The reason you would need to replace this part is if your light is not turning on when your door is open. For this repair, you will need a putty knife, and a small flat-blade screwdriver.