Parts That Fix Whirlpool Refrigerator WRT314TFDW00 Fridge too warm

This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.

This capacitor (Refrigerator and Freezer Compressor Run Capacitor, Run Capacitor) provides the voltage or energy current required to start the compressor and keep it running. It allows the compressor in your appliance to easily cycle on and off. This capacitor mounts directly onto the compressor starting relay. If the capacitor is faulty the compressor may get unusually hot and draw excessive amperage. It the compressor overheats, it may fail to run until it cools down again. The compressor may also get noisy from overheating. If this part is totally electrically open, it is defective (often due to overheating) and needs to be replaced. The part measures 1 inch by 1-1/2 inches, and is constructed of plastic with two metal wire terminals. This item includes 1 capacitor, sold individually. This part comes in black.

This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater.

This thermally operated switch, controls the compressor circuit and therefore the temperature of the fresh food compartment.

The Compressor Start Relay with Overload is an essential component for refrigerators, designed to ensure your compressor starts efficiently. This genuine OEM part is compatible with various refrigerator models. The relay attaches to the compressor and helps initiate the motor, allowing the refrigerator to operate smoothly. With the built-in overload protection, it also provides a safeguard to prevent potential damage to the compressor. Installation requires safety precautions—be sure to unplug the refrigerator and store any perishable items before proceeding with the repair. Wear work gloves to protect your hands from sharp edges or electrical components during installation. It’s important to follow the manufacturer's guidelines when replacing the start relay, and to verify compatibility with your specific refrigerator model, as slight variations in size or shape may occur between different models.

This part is used to circulate air through the inside of the refrigerator to help improve the cooling efficiency.