Parts That Fix Whirlpool Washer WTW5100HW0 Will not drain
The washer drain pump assembly is an essential component that ensures efficient water removal during the draining portion of the wash cycle. Crafted for durability and reliability, it restores optimal performance to your appliance. The assembly is designed to fit seamlessly into your washing machine and may include multiple parts, so consult your washer’s parts diagram for a comprehensive list of included components. Installation is straightforward but requires unplugging the washer and wearing protective gloves for safety. Always confirm compatibility with your washer model before purchasing to avoid fitment issues. This replacement drain pump assembly is in stock and ready for prompt shipment, ensuring minimal downtime and a quick return to optimal washing performance.
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the splines on the clutch assembly are stripped and the washer is making noise, or if you are having problems with the wash and spin cycles. You will need to access the bottom of the washer for this repair. It is easiest to if you disconnect your washer from both the water and power source, and lay it on its back. The clutch assembly contains 6 parts, and all are included with the kit. It is also important to change out the entire assembly, rather than individual pieces.
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be careful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.
This 6-pin shift actuator is an authentic OEM part supplied directly by the manufacturer for use in washing machines. The shift actuator is responsible for controlling the movement of the washer transmission during the different phases of the wash cycle. This allows the washer to switch between agitating and spinning modes. Signs of a faulty shift actuator include the washer failing to agitate or spin, incomplete cycles where the washer gets stuck in one phase, or unusual noises during operation