This fuel tank assembly is supplied by the original manufacturer for use in trimmers. It is responsible for storing and transferring fuel to the engine for combustion. The assembly consists of a plastic tank, a fuel cap, a fuel filter, and the fuel lines which have a diameter of 0.25 inches. If the fuel tank is damaged, or the fuel lines are clogged, the assembly will need to be replaced. A faulty fuel tank assembly will result in fuel leakage, hard starting, rough idling, and poor equipment performance. To begin, drain the fuel from the tank. Disconnect the fuel lines and remove the mounting hardware that secures the assembly to the equipment. Pull off the old assembly and align the new one with the mounting holes. Secure the assembly in place and reconnect the fuel lines. Refill the fuel tank to complete the repair.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Trimmer.
Part# 753-06183 replaces these:
753-06183
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
5 Stars
2
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Erik G - October 28, 2020
Verified Purchase
Great Part! As good as the original part.
This part was in great condition. It was also easy to install and an identical replacement to what I had.
★★★★★
★★★★★
Nicholas R - May 17, 2019
Verified Purchase
Fuel Tank assembly
The part was identical and easy to install.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Super Easy Install
The fuel tank is held in place by 2 screws. Simply take the screws off and pull off the fuel lines. Take the new fuel tank. Put it in place and screw the 2 screws in to hold the fuel tank. Connect the fuel lines and you're done. This is the easiest repair I have ever done on any of my lawn equipment.
Michael from GLENN HEIGHTS, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fuel line broke
Removed the two screws holding the fuel tank to the main unit. Removed the two fuel lines and any stuck on rubber. Installed and installed two screws to mount the new tank. Slid fuel lines on their respective connectors. Done.
Erik from ROBERTSDALE, AL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
12 of 14 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bruce
July 16, 2019
For part # 753 06183 fuel tank assembly to Murray trimmer, do the fuel lines come with it?
For model number MS2550
Hi Bruce, thank you for your question. The fuel lines that come with this part are the ones that go directly into the tank as shown in the photo above for the part. Good luck with your repair.
9 people found this helpful.
Was this helpful?
Thank you for voting!
Dave
September 25, 2019
I need to know what the black part is that is inside the fuel tank assembly that is connected to the end of the line from the primer bulb. Thanks for your assistance in this. Regards, Dave
For model number TB22EC 41BDZ22C766
Hi Dave,
Thank you for your question. The part that is inside the fuel tank you are referring to would be the fuel filter. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Garrt
June 6, 2023
does the replacement tank include the fuel filter?
For model number bolens 110 weedeater
Hi Garrt, thank you for your inquiry. Yes, this compatible fuel tank assembly, part number PS10009586, includes the fuel lines, fuel cap, and fuel filter. We hope this information helps!
_WW_1.gif "Part Location Diagram of 753-06183 Bolens Fuel Tank Assembly")
_WW_1.gif "Part Location Diagram of 753-06183 Bolens Fuel Tank Assembly")
