Steel Ball 89-13-8

This OEM choke friction ball measures approximately .125-inches in diameter and is made of high-quality steel. This choke friction ball works within the carburetor of an engine, along with the choke friction spring, to provide tension onto the choke lever for precise user control. If the ball becomes warped, damaged, or worn-out, it can cause the level of tension for the choke lever to diminish, ultimately affecting the choke mechanism functionality. If you notice the choke lever is loose, difficult to adjust, or simply does not hold, the friction ball is likely damaged or warped. To prevent any sort of issues with the friction ball in the future, make sure to perform regular cleaning and maintenance on the choke mechanism and apply a small amount of lubricant such as silicone grease or engine oil when necessary. To replace the choke friction ball in your engine, disconnect the spark plug on your equipment and access the choke mechanism ? which may require you to disassemble covers, filters, or other components to access it. Once you locate the ball, use a screwdriver or set of pliers to remove the ball from its housing and clean the housing before installing the new ball. You can then install the new ball, along with the rest of the choke mechanism, and test to see whether its movement has improved