The infinite burner switch controls the stove top eight-inch surface burner, which is the large surface element. If your surface element is not warming up, the element can be tested to determine whether or not it is defective. If your element is not defective, then it is more than likely that the infinite burner switch is the issue. Before you install the infinite burner switch you will need to unplug your range from the power supply, or shut off the home circuit breaker. The tools you will need to do this repair include a number one square head screwdriver and a pair of needle nose pliers.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Range Infinite Burner Switch
Troubleshooting
This part fixes the following symptoms:
Element will not heat | Oven is too hot | Will Not Start | Oven not heating evenly
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Benjamin K - August 17, 2024
Verified Purchase
Easy repair. excellent value
Fast shipping. Quality part that fit perfectly and works great.
★★★★★
★★★★★
William D - March 29, 2024
Verified Purchase
E Z Repair
The site was simple to navigate with easily identifiable cut sheets/parts.
★★★★★
★★★★★
David R - March 14, 2024
Verified Purchase
Easy repair; part work as expected.
Apparently the part works as it was used in a rental and the tenants haven't responded w/ a 'comeback'.
★★★★★
★★★★★
Terry K - February 21, 2024
Verified Purchase
all was great
it was just as they said and worked great very happy with it.
★★★★★
★★★★★
Alan L - September 26, 2023
Verified Purchase
Keeps shorting
I’ve had to replace this part twice in 5 years. Start’s shorting out. Hope this one is better and they just had a bad batch.
Parts direct is great though and ships the correct parts timely.
★★★★★
★★★★★
Mark M - September 1, 2023
Verified Purchase
Easy repair great part
Exactly what I needed at a good price. Very happy
★★★★★
★★★★★
Michael John H - July 21, 2023
Verified Purchase
Exactly what we needed
Part Select made it easy for me to find the exact replacement part to fix my stove. Shipping was fast. Instructions were clear. The stove is like new again. Thanks!
★★★★★
★★★★★
Brian H - July 12, 2023
Verified Purchase
Pretty easy repair
Exact part I needed to repair malfunctioning burner on my Frigidaire stove ..
★★★★★
★★★★★
Allen P - June 1, 2023
Verified Purchase
Worked as expected.
Instructions were good. The burner switch fixed the problem.
★★★★★
★★★★★
Norman G - May 23, 2023
Verified Purchase
Easy repair, part was perfect.
Fast shipping, part was exactly what was need and repair went fast.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 34 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
My oven door seal was worn and did not seat properly. It leaked heat.The infinite burner was not warming in the low heat positions
I followed two very good videos on how to do the repairs. It took longer to clean all the disassembled parts and the glass than it did to actually do the repair. A word of caution: Be sure to lock the door hinges in the open position before you lift out the door. They must be locked open to put the door back on. It's difficult to loc
... Read morek them open once the door is removed. Also when you replace the screws get them all aligned in the holes before you lock everything down. The infinite burner switch was pretty easy to replace but watch out for sheet metal cuts when you are removing the back of the stove. I recommend gloves. My stove has a 12 inch infinite burner, but the parts list only mentions a 10 inch burner. Before I ordered it, I had to call the company to verify that it could be used for the 12 inch burner as well.
Both front burners began heating too fast and too high. One damaged the finish on the splash pan.
At the Frigidaire parts website, I found the parts and saw that there are videos that show how to replace the burner controls. In brief: 1) Slide the range/oven out so you can get to the back of the control hood. 2) There are three screws that hold the cover in place (the video showed four). 2a) The video also suggests usin
... Read moreg a #1 square bit. I found that there was indeed a square hole in the caps of the screws, but they also had a hex head that a 1/4" hex nut driver fits. So I used that. 2b) Be careful taking out the last (top center) screw. When it comes free, the cover can drop and bruise or cut your foot or the floor. Having a helper is worth it! 3) The switch for the larger elements has a red dot on front and back. Match it with the one in place that has a red dot. The switch for the small element doesn't have a dot. 3a) Holding a new switch in your hand, remove one wire at a time from the switch in the control hood and put it in the same place on the new switch. I found that for my stove, there was a fixture holding two wires and another holding three wires. This made it impossible to put the wires on wrong. 3b) When all wires have been transferred, pull off the control knob in front and unscrew the two screws that hold the old switch in place. Take out the old switch and replace it with the new switch. 3c) Use the two screws to attach the new switch in its place and replace the control knob. 4) Repeat for as many switches as you purchased. I did all four. 5) Replace the cover. 6) Slide the range back into place.
I found black deposits on all the switches, that must have come from a contactor inside, so I was glad I replaced them all.
Another tip: while the unit is out, clean off the sides and back that you couldn't get to while it was in place. For us, this took as long or longer than the steps above for replacing the switches.
my burners would just heat up solid red even when i had controls turned down to 2 or 3. i would have to turn controls off and back on, then they still would just go back to glowing red
This was my first time ever working with electrical issues. My husband is not physically able to do repairs now. Very easy fix. Just viewed video repair instructions and it went exactly as instructed. Within 45 minutes, I had my stove repaired and cleaned and back in working order!! Great results. My range is working perfectly again and M
... Read moreama is happy!!
Burners constantly overheating, and inconsistent heating.
With the stove pulled out and unplugged, There are 4 square head screws to pull a metal plate off the back of the range. Once that is off, the infinite switches are in line and can be removed with a philips head screw driver/bit. I placed each wire onto the new switch as I removed them from the old, to avoid any confusion. The entire repa
... Read moreir took less than 10 minutes. Incredibly easy.
Read less
David from MOUNT VERNON, ME
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Electric element would intermitantly go on high, even on low settings.
Slid stove out, disconnect power plug, removed top control panel with 4 screws. Unplugged two electrical connectors. removed knob and nut removing switch. Re-assembled in reverse order and test all functions.
Sean from ASTORIA, OR
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The element gets very even the control is at minimum
Removed the defective part. Install the new part, insert the connectors. Now its working
adolfo from new york, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Surface element would stay on high no matter the position of selector knob
First, make sure power is off to range. Removed backing cover, pulled one wire off infinite switch at a time to put in right place on new switch. Easy fix.
Dale from VERMONTVILLE, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The switch wasn't working on all the different settings.
first thing was to turn the breakers off. then pull the range away from the wall. used an 1/8 th inch socket to take off the back panel to get access to the switch.used a Phillips screwdriver to disconnect the switch under the knob in the front. took off the wire terminals one at a time and matched it to the numbers on the old switch.repl
... Read moreaced the knob, screwed it on to the range. turned the breakers on and tested the switch.worked fine, replaced the back cover and pushed it back into place.
Read less
James from NEW HYDE PARK, NY
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner not controlable
Removed rear panal, removed screws from of switch. Unplued wires and installed new switch and put back together. Very easy.
Royce from KEENE, TX
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
35 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Anthony
October 4, 2017
This part says it fixes a burner that wont heat or start, what if the burner overheats will this part help fix this problem?
For model number FEF366ESH
Hi Anthony,
Thank you for your question. It could be your switch, however you should also check the wiring between the switch and the burner, and your should also check your burner as well. It could be either of these parts that are causing your issue. Though more likely your switch or burner itself. Good luck with your repair.
25 people found this helpful.
Was this helpful?
Thank you for voting!
Frank
January 21, 2018
The front left element gets hot then turns off then back on...?
For model number FEF368GBD
Hi Frank,
Thank you for your question. This particular problem could be either your switch or your element. You will have to test both with a multi meter to see which one is malfunctioning. Remove both parts from the appliance to test them. Make sure to turn your switch to an on position while you are testing. If your meter shows no change that means the switch is bad and needs to be replaced. Your burner should read anywhere between 0 - 120 ohms of resistance. Good luck with your repair.
14 people found this helpful.
Was this helpful?
Thank you for voting!
Nick
November 17, 2017
The 8" burner would glow really hot and would not turn off or change temperature. Found that it was most likely the infinite burner switch. Ordered one and replaced but the burner is still getting way to hot. What else could i do to fix this problem?
For model number TEF361ESD
Hi Nick,
Thank you for your question. There are really only two other parts that you could look at. You should take a look at the wiring between the burner and the switch. See if there is any damage. If there is not, then you will likely have the change your burner. I hope that helps. Good luck with your repair.
10 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
November 9, 2019
Large rear burner (left rear) switch has failed. Electrical arc sounds and the smell of electrical fire. Other burners work fine with no issues. Need replacement part number.
Hi Mike, the switch is part number PS1145040. Thank you for your question and good luck with your repair!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Juan
January 3, 2020
The replacement part has 5 plug ins the old one has only four. How do you replace it?
Hi Juan,
Thank you for your question. There is a video listed with the part on our website that you may reference on how to install it. If it does not provide you with the information that you need, you will need to contact the manufacturer. We hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Tony
January 22, 2020
When turning element on it stays hot even when turned down on low
For model number 880652325r2
Hello and thank you for writing.
It certainly sounds like it could be a faulty oven sensor PS11749737 and/or possibly a faulty switch PS12349727, you should check the part(s) for signs of damage, and replace as necessary. We hope this helps. Please contact us anytime if you require further assistance.
Burner works, but light stays on even after burner has cooled.
For model number LFEF3048QF
Hello Doug, thank you for writing. This is likely due to a faulty Infinite Burner Switch. This part number PS1145040 for the large burners, and part number PS1145039 for the smaller burners on your model range. You may also want to consider the Electronic Control Board, part number PS12114577 as the cause. Good luck with your repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
RJ
August 4, 2017
Please explain the difference between part number# ps- 1145040 vs 1145039 are they the same part?
For model number FEF352AWA
Hi RJ,
Thank you for your question. The switches are for different burners on your appliance. The diagram underneath your model information does outline which switch would go where on your appliance. I hope this helps.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Bill
April 3, 2018
When I turn the switch on sparks fly out of it and before that happened the burner would stay on
For model number FEFL79GSA
Hi Bill, Thank you for the question. I suggest having the switch replaced. I also suggest checking the wiring. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Patricia
January 10, 2019
Big problem the infinite switch was replaced years ago on a premier electric stove with another switch that does not match premier. The shaft is square measuring 1.25 x 1.25. I need a knob. Any help?
Hello Patricia, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
