Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This is a heating element compatible with various makes of ranges and ovens and is sold as an individual part. Measuring 20.5-inches wide and 20.25-inches (with terminals) long, this heating element is a genuine OEM part. If your range is not heating during the bake setting, not heating evenly, or if the element is burnt out or damaged, the element will need to be replaced. This repair is simple and only requires that you disconnect your oven from the wall outlet and use an appropriate screwdriver to disassemble and replace the element with the additional support brackets to secure it.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Element will not heat | Little to no heat when baking | Oven not heating evenly | Oven is too hot
This part works with the following products:
Range.
Part# W10779716 replaces these:
AP5970727, W10289097, W10774342, W10779716VP
Customer Reviews
Average Rating:
★★★★★
★★★★★
153 Reviews
4.9
Filter By Rating:
5 Stars
139
4 Stars
11
3 Stars
2
2 Stars
0
1 Star
1
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Tina F - June 2, 2024
Verified Purchase
Easy repair.
The part was easy to install. The video explains all steps for simple installation.
★★★★★
★★★★★
Christian P - October 20, 2020
Verified Purchase
Right Fit Fast Delivery
Just right, no issues.
★★★★★
★★★★★
Josh G - November 20, 2024
Verified Purchase
Very easy diy project.
Instructions were spot on. Fixed out oven and so much cheaper than buying a new one.
★★★★★
★★★★★
John K - December 11, 2024
Verified Purchase
Easy replacement
Part arrives quickly, and works perfectly. Video made the replacement easy. Great all around experience.
★★★★★
★★★★★
Percy M - December 25, 2024
Verified Purchase
Bake element
I received the part it should have been wrapped up for shipping. The part does work.
★★★★★
★★★★★
Scott B - January 16, 2025
Verified Purchase
Great part
This part fixed my oven and it was delivered very quickly. My go to parts company for appliances.
★★★★★
★★★★★
David S - April 26, 2025
Verified Purchase
easy part
worked as expected
★★★★★
★★★★★
Edward B - August 24, 2018
Verified Purchase
Easy. Works great!
Needed the element in a hurry for a lot of baking. Got it quick. Didn't miss a beat!
★★★★★
★★★★★
Kevin W - January 25, 2018
Verified Purchase
Maytag Bake Element
Shipped fast. Exact part and fit. Easy fix. Works great so far.
★★★★★
★★★★★
Laurie M - February 3, 2018
Verified Purchase
Easy repair
Worked great and fixed issue
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 26 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The oven was not getting up to temperature
An easy repair. I just needed a screwdriver. I watched the video that you sent me with the part. I followed the directions in the video and the job was completed in 30 minutes! Easy Peazy!! I’m back to cooking!
Thomas from BOCA RATON, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bottom heat element burned out
Unplug from power source, remove panel on back of range, unplug power connections for bottom element on back of range, remove bottom pan in oven installed element, put back together in reverse. Video on parts select website is the bomb!
Robert from CHURCHTON, MD
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
9 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old element burned up
Took out the bottom tray and the back cover panel, unplugged the old element and plugged the new one in and reassembled
Doyce from AZLE, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake element failed
Unplug range, remove cover from back of range disconnect red wires from element spade connectors. Remove oven racks, remove two screws from back of bottom tray, and remove tray. Remove screw from element bracket and remove element. Install new element and repeat steps in reverse order. Done.
Jeff from HOLLYWOOD, MD
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake element had burnt out
Unplugged stove-Removed oven door two screws held the oven bottom pan removed same to observe the element removed thre fasteners removed inspection cover on back of the oven pulled off two electric wires replaced element reassembled easy job
Richard from HAMPSTEAD, NC
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
4 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken lower heating element
Shut beaker off Unhooked wires on element back of stove Removed all racks Unscrewed lower plate cover Removed element Inserted new element Rebooked wires to element Reinstalled cover plate Turned breaker back on Turned range on and let heat up Turned it off Reinstalled racks
Rodney from MC CONNELLSBG, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
After watching the video, I said to my wife that this is a simple installation. However, I’m looking at the screws, I did not have the correct screwdriver to remove the screws. I had to go out and buy that. After that, it was not a problem.
I first shut off the breaker, then, after pulling the stove away from the wall, I unplugged it. I removed the two screws in the back of the stove which came off easily. I removed the two screws inside the oven and removed the bottom plate. I noticed the heating element I was changing had braces along the bottom. I had to remove the two s
... Read morecrews and removed the burnt out element. The new element did not have the braces the original element had, but it fit in perfectly. Then I replaced all the screws, plugged it in and turned on the breaker and it worked. The only thing that we noticed is there’s a clicking sound every time the temperature increases. Not sure what that is.
Read less
Tom from THE VILLAGES, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Electric oven was not heating up
I read the help section and it said that the element was likely to be the problem (84%) and the fuse had a 14% chance to be the problem so I purchased both. After watching the video I tried the element first and that's what it was so I returned the fuse, Thanks for the help and video.
The company said it would cost me $698 to r
... Read moreepair. I had a 2 year warranty and that was 2 months out of date.
Again thanks for the help.
Read less
Daniel from SARANAC LAKE, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The bottom heating element was damaged and needed to be replaced.
Followed a video I found online showing how to replace the bottom bake element. It was very easy to do. I simply unplugged the over, removed the back wire cover and detached the damaged element connectors.
I then removed the bottom oven cover which conceals the element. Unscrewed and removed the damaged element and replaced it
... Read more with the new one. Connected the wires to the new element and then Installed the bottom cover along with the back wire cover and plugged the oven back in. It was really this easy.
Read less
Anne from DREXEL HILL, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The oven wasn't heating up to temperature. Kept showing it was preheating but never got there.
We watched the excellent video and followed the steps. We're in our 70s which is why we needed a flashlight to see the screws in the oven! So if we can do it...
Susan from NEWTON, KS
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
7 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
61 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wayne
November 19, 2017
The replacement baking element looks different than my old one, do i need to move brackets over to new one or are there some instructions on how to install the replacement
For model number MER8674AB0
Hi Wayne,
Thank you for your inquiry. There is a video on our website that you can reference on how to install the bake element. The element may appear different from yours, but the ends are the same You will find the video under part number PS249247. I hope this helps. Thank you and have a great day!
22 people found this helpful.
Was this helpful?
Thank you for voting!
Terrence
November 16, 2017
Will a bad oven sensor cause the oven to take an extremely long time to reach selected temperature, and cause food not to cook thoroughly (on the bottom) when the oven says it has reached temperature? If not,can you possibly suggest a cause?
For model number WFE714HLAS0
Hi Terrence , Thank you for the question. Yes the Oven Sensor can cause this.I suggest testing the sensor to see if it is defective.Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!
15 people found this helpful.
Was this helpful?
Thank you for voting!
Kevin
October 24, 2017
I need the lower baking element. The diagram image looks different from the part in my oven. The lower and upper elements connect to the back in the "center" of the oven wall. The parts diagram shows them with an offset to the lower left side.
For model number WFE540H0AS0
Hi Kevin,
Thank you for your question. This would be the correct bake element for your appliance. I hope that helps. Good luck with your repair.
10 people found this helpful.
Was this helpful?
Thank you for voting!
Carrie
December 3, 2017
How do I know if I need a new sensor or a new baking element? Oven takes a long time to reach the temperature desired. Once it does, the food is uncooked on the bottom of the pan and overcooked on the top of the pan.
For model number MER8674AW0
Hello Carrie,
Thanks for your question. Your issue is more likely due to the sensor, but we would recommend using a multi-meter to test both the sensor and the bake element, and replacing either if they are not showing continuity.
I hope this helps.
Looking for 3600 watt baking element for this stove. I asked earlier today and your expert replied with a part no. D29142 . When i looked this part up it is a capacitor kit.You must have sent me the wrong info. Could you send the right no. For a baking element 3600 watts. Thanks
For model number ywfe540h0aso
Hello Tom,
Thank you for your question. We apologize for the previous confusion. The part number for the baking element for your model is under part PS11703285. Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Virginia
January 28, 2019
I have Maytag model mer8674ab0 oven that needs a replacement heat element which is under a heat cover. It has a two pronged sections that fits into the bottom middle of the back of the oven. What element is compatible? It is square shaped. The one in the diagram for the oven has the prongs on the left. That is wrong. I need a middle pronged piece. Which do you recommend.
For model number MER8674AB0
Hi Virginia,
Thank you for your question. The part number listed under your model number for the bake element you described is PS11703285. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Keith
February 6, 2019
I replaced the thermal fuse-thermostat, checked the heating sensor and it was in range for ohms 1085. Both top and bottom element still will not heat. I checked the wiring harness and there is no burnt or loose wires. Trying to figure out the next step?
For model number MER8674AWO
Hello Keith, thank you for your question. Since the sensor is testing within range and there are no burnt or broken wires on the elements the electronic control board would have to be replaced, Part Number: PS11756979. Good luck with your repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Alexandre
January 16, 2020
Does this element fit on my oven (3600w) ?
For model number YMER8880BS0
Hi Alexandre. Yes this part W10779716 is compatible with your model YMER8880BS0. Thank you for your question and good luck with your repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
George
December 22, 2019
Hi I need an upper element for my Whirlpool stove do you have any and how much
For model number YWFE710H0BS0
Hello George, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS11703285. Please enter the part number into the site for the current price and availability. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Ronald
December 17, 2018
My bottom heating element in my oven has burnt out not sure of my part number looks like w10779716 is this correct
For model number Mer8700DS1
Hi Ronald,
Thank you for your question. Yes the correct part for the bake element is W10779716. I hope this helps. Thank you and have a great day!
5 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11703285
Manufacturer Part Number: W10779716
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Range","title":"Range","url":"/Range-Parts.htm"},{"position":2,"name":"Element or Burner","title":"Element or Burner","url":"/Range-Elements-and-Burners.htm"},{"position":3,"name":"W10779716","title":"W10779716","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
