The belt wraps the length of the dryer drum, secured by a tension pulley and then loops around the motor pulley. If you find that the drum is not turning properly or at all while your dryer is in succession, it might be due to the belt being broken.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Andrea M - December 17, 2021
Verified Purchase
Perfect part! Easy to install!
The Dryer Drum belt was sent in a timely manner! I found a You tube demo that gave easy installation & Dryer was up in running with in an hour ! I had never installed one before.
★★★★★
★★★★★
Sam D - October 14, 2021
Verified Purchase
Belt
Right part, works great.
★★★★★
★★★★★
Luis C - October 6, 2021
Verified Purchase
easy repair , great part.
My appliance is working perfect
★★★★★
★★★★★
David S - February 24, 2021
Verified Purchase
Drum Belt fixed
The belt was packaged well, delivered in a week, which is pretty good.
easy to put on from the front since I had starting taking the back off, which is not where the belt gets replaced. I ended up with a few extra screws but hey, its a dryer not an airplane.
Works great, definitely not an item to skimp on quality. DIY and save big bucks
★★★★★
★★★★★
Gene F - March 16, 2019
Verified Purchase
Part was good. Shipping was 0 out of 10
Part was very good. I could have driven to Dallas and back and still beat the shipping. Part set in Dallas from a Friday to Wednesday before it moved. Smartpost is not your best shipping if you need the part.
★★★★★
★★★★★
Rafael B - October 30, 2018
Verified Purchase
Pefect Fit
Part was easy to find on Website and it arrived as promised. Perfect fit for my Kenmore
★★★★★
★★★★★
Matthew S - July 21, 2018
Verified Purchase
Easy repair
The belt was new and replaced the nine year old belt as a precaution. I'm very happy with the service of pastselect.
★★★★★
★★★★★
David T - March 17, 2018
Verified Purchase
After a brief mix up
My part got shipped to wrong place first but they got it straight works great my dryer is back on line.thanks part select!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.0 / 5.0, 12 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Loud squealing during operation
We replaced the drum belt and the rollers. Everything was very easy and straightforward but took a fair bit of time due to the extensive disassembly required. We followed the video available on the website for the belt replacement, which was very clear and accurate. Unfortunately, the rollers we received used a different attachment metho
... Read mored than the OEM rollers which are depicted in the video provided. Instead of attaching from the front with a triangular plastic lock washer, they had to be attached via a nut on the back side of the roller. This required some improvisation and was a little more involved. For the rear rollers, we actually had to remove another panel to access the nuts, which was not described in the video. Nevertheless, we managed to get everything replaced and the dryer is working like it was the day we bought it.
1 of 4 Drum Rollers Froze Preventing drum rotation.
Replaced idle pulley wheel, worn drum belt and all 4 rollers (1 frozen) due to dryer age. Site video re general disassembly/re-assembly easily adapted to this model and very helpful with exception of replacement of drum rollers. New rollers received (AGM75510755) were pre-mounted on included shafts. This required removal of existing roll
... Read moreer shafts to replace with new shaft/roller units. Site video shows placing a new roller on existing shafts after removing a plastic retaining clip. New roller/shaft assembly is a better option and fortunately I did not order extra retainer clips! Rear drum roller shafts have small carved out space to fit a box end wrench to remove shaft nut. Watch out for sharp edges on internal steel parts!
Completly disassembled dryer removed 2 rear rollers installed 2 new rollers. Reassemble dryer in including new drum belt. Dryer is nice and quiet again running fantastic, thank you for your support
I took the dryer apart. You have to take the top off, then the door/front off. There are wires & other parts that need to be unhooked as well. A flat tip screw driver can be used to pop the top off. The screws were all phillips. Once you take that all apart, then you can access the drum. I bought the belt because I thought that was what w
... Read moreas wrong with it. Turned out to be hair in the drum rollers. Took those all off & put wheel grease on each of them, put new belt on (since I had it LOL) then put it all back together. Make sure everything is lined up correctly otherwise you will have to take it apart & reline (which I had to do) I am a 49yr old female & was able to do this repair on my own!
Read less
Beth from FROST, TX
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
making squeaking noise
Watched a You Tube video
Paul from MONTGOMERY, AL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Shrieking noise when the dryer tried to turn
I assumed this was a belt problem. Ordered the belt and followed the excellent screw by screw instructional YouTube provided by PartSelect. In fact, I probably would not have attempted the repair, until I watched the video and was reassured that I could do it. When I got the front panel off, the problem was obvious. There was a dishrag st
... Read moreuck in the blower. Didn't need the belt, but the video was sure worth the price of the part (~$17). Mr. Appliance charges $109 to DIAGNOSE the problem! This was way easier than dealing with them, especially during a pandemic near the holidays.
Read less
William from JOHNSON CITY, TN
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Frozen up roller on rear of dryer
Removed top of dryer I carefully removed wires from back of control panel Removed control panel Most of screws hold cabinet together Unhook wire from light on door and sensor on the front panel. Remove the front door and panel together I changed both front rollers on front panel If you have to change r
... Read moreear rollers lift tub up by belt Remove screws on back of dryer that will let you lift out inside rear panel that holds the rear rollers Change rollers and just revearse procedure to put back together
Used a video to explain how to do repair. Video showed about 1 1/2 hours, took probably 4 hours at least. Bearings were very difficult to remove and were in very bad shape for a 4 1/2 year old washer. We were very lucky and did not have a spider that needed to be replaced. All and all not to bad of a repair, but without the video we found
... Read more it would have been a guessing game of how to do the repair. Parts all worked well and the washer is now quiet as a mouse in the spin mode. Spending $200.00 instead of a new washer was the goal and it was completed. Here's hoping to more than 4 additional years before another repair is required.
Unplugged dryer, pled forward to get access to back of dryer. Removed screws, enabling top, front control clip. door panel to be taken off. Lift out drum, replace heater assembly. drum belt, thermistor. Cleaned entire interior and reassembled, working good as new. All parts fit and were a exact match.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
16 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Claudia
September 27, 2017
How can we change the belt
For model number DLE5977S
Hi Claudia,
Thank you for your question. Here is a link to a video that we have set up on how to do this: https://youtu.be/YZdUgbQ4rpE . Good luck with your repair.
14 people found this helpful.
Was this helpful?
Thank you for voting!
Susan
October 17, 2019
Is there just one belt to replace, or multiple belts in my dryer? Does the partselect order include just one belt?
For model number dle7177rm
Hi Susan, this part PS11705916 is just one belt, I can only find one belt for your model. Thank you for your question and good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Clarence
February 13, 2019
Dryer won't turn on. Light inside drum is on. Replaced door switch
For model number dlg2051w
Hi Clarence,
Thank you for your question. If the dryer will not start and you have already replaced the door switch, there are some other parts that you will need to check to see which ones are causing the issue. You will need to check the drive motor, the electronic control board and the belt. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jack
March 21, 2019
Is this the correct belt for my Kenmore 796.80272900 dryer?
For model number Kenmore 796.80272900
Hello Jack, thank you for your question. Yes, the belt PartSelect Number: PS11705916 is the correct replacement part for your specific appliance. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Brandon
April 30, 2019
According to your diagram i need part f110 what is that exactly ?
For model number DLEX7600WE
Hello Brandon, Thank you for the question. F110 on your model is a Heater Assembly, PartSelect Number PS3527790. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Emmanual
January 3, 2020
What is the belt length?
For model number DLE8377NM
Hello Emmanual,
Thank you for your question. The belt is 92 1/4" in length. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ruthie
March 7, 2022
What is the length of this belt?
For model number DLG5988W
Hello Ruthie, Thank you for your inquiry. We show this belt as approximately 92 1/4 inches long by 1/2 inch wide. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Paul
June 6, 2023
Hi:
I need to buy a belt for my dryer: LG model DLGX8101W. At your website, I see this belt for sale: 4400EL2001F, PS11705916. Will this belt fit my dryer? I am concerned because the belt in my dryer seems to be a little longer than other belts. Also, the belt in my dryer has four grooves on the inside. Most other belts seem to have only three grooves.
Thank you.
For model number DLGX8101W
Hi Paul, thank you for contacting us. The belt you mentioned is not compatible with your model. The compatible part is part number PS7785075. We hope this solves your problem!
