Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This water valve is for 60% hot water and 40% cold - This is done to save on energy.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jerry S - May 7, 2019
Verified Purchase
Perfect Part,Easy Fix
Part arrived on schedule. Perfect replacement. Used PartSelect video for installation, video was right on. Moving washer and install took 30 minutes.
★★★★★
★★★★★
Steve S - November 19, 2018
Verified Purchase
Good part
New in box. Works great. Got rid of leak in drum
★★★★★
★★★★★
Lori H - May 12, 2018
Verified Purchase
Works Great!
Fast Delivery! Easy to install and works perfect! Made me feel like a repair woman! I will always use your products!
★★★★★
★★★★★
Susan A - August 1, 2018
Verified Purchase
Easy to fix
Just want I needed. Stopped the leak and works fine now.
★★★★★
★★★★★
Michael C - April 30, 2019
Verified Purchase
saved my washer
It took me less than 20 minutes to replace my faulty water valve with this new replacement and literally saved my washing machine from being dumped.
★★★★★
★★★★★
Sherry S - April 3, 2019
Verified Purchase
fast service, great web site
correct part and was able to replace without problem, saved me big bucks on service call
★★★★★
★★★★★
Wayne J - May 21, 2020
Verified Purchase
Part is factory identical replacement - fits/works like the original!
Appreciated having the part verified by PartSelect that it would fit my washing machine based on the model number. Part was identical to the original and has worked well. Part was also well-packaged, promptly shipped and was received on the date promised.
★★★★★
★★★★★
James E - July 11, 2020
Verified Purchase
Water valve
Fit just like the original, easy fix
★★★★★
★★★★★
Patricia J - August 26, 2018
Verified Purchase
Thanks for the email about del. time.
I have not even opened the box with the part. My washing machine, for some reason is not now leaking into the tub!! Is this normal?
★★★★★
★★★★★
MICHAEL R - August 10, 2018
Verified Purchase
N/A
Kind of hard to write a review about something I haven't even received yet.
August 13, 2018
Hello, Thank you for leaving a review on the part ordered. Checking the order I am showing you have already contacted us to address the issue. Please let us know if there is anything else we can assist you with.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 18 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replaced the solenoid-operated water inlet control valve on 2006 Amana Washer
The PartSelect video was excellent and very helpful. This replacement took extra time because the washer was located in a tight space and moving/lack of access to the rear of the washer created several issues. Tips based on my experience: 1) I used a MasterLock ratchet tie-down to secure the lid when raising the hinged top of the was
... Read moreher (I wasn't able to lean and support this against a wall as demonstrated in the install video). 2) The fill hose that connects to the water valve was difficult to remove and I needed two large-jaw adjustable pliers to do this. A small amount of Dawn dishwasher detergent applied to the inside of the hose made re-assembly quick and easy. 3) A set-screw holds the valve in place. Easy to remove but because I couldn't get in back of the washer, I had to measure from the bottom of the valve to line-up the screw with the hole in the valve assembly to mount the new unit (this wouldn't be a problem if you could see where the screw goes but I couldn't get in back of the washer for this simple final step). Very pleased with finished result - just needed some extra time and additional tools.
Read less
Wayne from CEDAR FALLS, IA
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A slow drip into the wash tub while the washer was not running
I followed the instructions in the video on the parts select web site. It was very easy, and went exactly as shown on the video. The part was ~$80. I am sure a repair person would have charged me ~$200 for the repair.
Jon from MASONVILLE, CO
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaked water into drum
Disconnected hoses. Raised top of washer. Remove outlet hose. Remove 1 screw and lift valve to top of washer. Switch wires to exact same spot on new valve and reverse process.
Steve from LINCOLN PARK, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No cold water only hot water filled the machine
The existing plastic valve is different in size and shape from the replacement part. The existing plastic valve is mounted to a metal mounting braket with bunch of screws. New replacement part has no mounting braket and can't be mounted to the old mounting braket. The old mounting bracket had 2 screws which are used to mount it to the was
... Read morehing machine body. The new valve has only 1 mounting hole which correspondes to a different mounting hole on the body of the washing machine. The new braket is designed to mount directly to the body of the machine. I removed one of the many screws on the old valve /mount braket and used it to mount the new valve directly to the body of the machine.
Read less
John from PHILADELPHIA, PA
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the water would not stop filling machine.water over flowed on the floor.
found repairs on the internet. And my husband followed the repairs and the washer works wonderful thanks.
We replaced the valve in the washer that feeds the hot and cold water to the wash/rinse cycles. The replacement was not simple only because you have limited space to work in as the back of the machine does not come off other than a small door in the back or by removing the top. We elected to work in the small space but were able to repl
... Read moreace the part within a short period of time and the washer is now working again.
Read less
Chris from CO, CO
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No hot water getting through
removed old valve bought new one put it in saved money
dennis from Spartanburg, SC
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
3 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water dripping from flume filled basin
I used a screwdriver to release the front side of the waaher top from the clips and tilted the washer top back. I then released the hose from the water valve and took out the mounting screws at the back. Replaced the valve and hooked everything back up.
Wayne from San Antonio, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The hot water stopped working on the washing machine.
My husband did the repair quickly and problem solved. The only difficulty was that the water valve was in a tight spot. Overall, if you are mechanically inclined and have the right tools this is do it yourself project.
Rebecca from Pineville, NC
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water would not shut off - overfilling tub - flood !
Researched "trouble shooting guide" Parts Select Website--
2 possible part failures - (1)--water fill valve inop-per Parts Select Web - 74 percent change of this unit failing. (2)--pressure line fractured - 24 percent chance of this unit failing......
Ordered both parts from Parts Select -
Replaced
... Read morewater fill valve (possible solenoid failure--(although a little difficult to get at valve replacemnt was easy - total porcess took a little less than an hour).
Needless to say - problem solved with valve replacement, this machine should be "good" for at least another 5 years.
Thanks for your kind help and most important - the easy to use data...........
Spence Merrell Dayton, Nevada
Read less
Spencer from Dayton, NV
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
9 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William
January 10, 2020
When i start to fill my machine. It begins to leak water from the bottom. I'm pretty sure it's one the right side this is happening.. would this be a seel issue? and if so is this a diy fix?
For model number MAV208DAWW
Good Day William. Thank you for your question in regards to your unit (Model Number MAV208DAWW). Based on our research, this may be the result of damaged or missing gaskets, seals or washers around the inlet hose. We would recommend checking around this area to see if this is the case and if so, replace these parts as necessary. We hope this helps. Best Regards.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
February 12, 2018
I took this machine from my girlfriend's house after she noticed water on the floor. She want a new one anyway, so i bought her one and took the old one for a rental apartment. I hooked it up at home to test it and look for a leak. When i started it, the water would flow into the tub, but would come out of the drain hose, so the tub would never fill. I ran it through the spin cycle and tried again, but the same thing happened. From your other information on your website, it looks like it might be the water valve, but is here anyway to check before buying a new part? And could it be something else entirely? I appreciate any help you can give.
For model number PAV3240AWW
Hello Mike, thank you for your question. The water inlet valve brings water into the unit. If the washer is filling and then draining at the same time it sounds like the issue is with the drain pump itself. I would recommend replacing the drain pump. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Matthew
February 16, 2018
Our machine will fill and run on the wash cycle and then drain. Once it gets to rinse, the machine will make a buzzing noise but will not fill with water...no water comes out. If I cycle past rinse to spin, the machine will start spinning. So basically it just isn't filling during the rinse cycle. Checking to see what part that might be before I purchase anything. I read online it could be the timer unit which I think was around $150.
For model number PAVT910AWW
Hi Matthew, Thank you for the question. If you can manually skip the cycle and the next cycle works, the timer will need to be replaced. I looked up the part and it is listed as No Longer Available/Discontinued. There is no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Terry
February 19, 2018
When my clothes begin to rest in the barrel, it spins, water continues to shoot out after the clothes have finished spinning. They are still wet, too wet to put in the dryer. I wonder what could be the problem?
For model number NAV5805AWW
Hi Terry,
Thank you for your question. If the clothes are still soaking wet after a wash cycle has completed, it is possible that the clothes in the washer were not in balance and some water remained in the tub. You will need to check the drain hose to see if there is a blockage and to make certain it is not bent. Check the drain pump for any debris and make certain that the belt is not stretched or damaged. Also, check the direct drive motor coupling to make sure it is not damaged. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ricky
March 9, 2018
Water is still dripping into the tub while in spin cycle. Feels to be cold water. Bad fill valve?
For model number PAVT234AWW
Hi Ricky,
Thank you for your question. That would be my first thought as well. You can usually test the valve with a multi meter to check. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Frank
January 17, 2023
my Maytag washer sometimes has a small water drip inside the tank when not in used. Then other times no drip?
thank you
For model number MAV2757AWW
Hello Frank, Thank you for your inquiry. Researching the model number that you have provided, this is usually caused by an issue with the water inlet valve, which you can test with a multimeter, on Rx1 mode, place the probes onto the valve’s terminals. The reading you should receive varies from model to model, refer to your owner’s manual for what the reading for a functioning valve should be. Good luck with your repair.
Hot water dripping very power than few months ago. I read in your web page than probably is the water valve. Do you think is that, i want make sure before but it because is not too cheap. I'm your customer, thanks for your videos
For model number CAV2004AWW
Hello Christian, Thank you for your inquiry. You can test the water inlet valve with a multimeter to see if it is causing the issue. Hope this helps!
Was this helpful?
Thank you for voting!
Michael
July 9, 2019
The washer will start filling for the wash cycle, then proceed to the actual wash cycle, then to the spin cycle. Then, when it starts to fill for the rinse cycle, it trips the gfci receptacle. I have tried to run it to another outlet and does the same thing. I let it sit for 30-60 minutes with the lid open, and it will start again with no problems, as if something is getting wet that is not supposed to be. Could this be some kind of electrical issue?
For model number HAV2557AWW
Hello Michael, thank you for inquiring. For this symptom you will want to consider checking and possibly replacing either the Water Valve part PS11738838 or the Timer part PS11738818 for your model. We hope this helps.
Was this helpful?
Thank you for voting!
Bill
July 29, 2019
My washer will only fill with hot water, no water goes in when cold water is selected
For model number AAV7000AWW
Hello Bill, thank you for inquiring. You will want to replace this Water Valve part number PS11738838 for your model to fix this symptom. Good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11738838
Manufacturer Part Number: WP21001932
