Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This gas oven safety valve is used to make sure that no gas is released until the igniter is ready to ignite. This part is for both the bake and broil igniter in your appliance.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Gas igniter glows | but will not light | Little to no heat when baking | Will Not Start
This part works with the following products:
Range.
Part# WP74006427 replaces these:
AP6010942, 74006427, 7501P097-60
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
5 Stars
2
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Louis N - December 7, 2018
Verified Purchase
Great service
Part came days earlier than expected delivery date and oven was working within the hour
★★★★★
★★★★★
WENDELL P - September 23, 2020
Verified Purchase
MY KITCHEN IS COMPLEATE NOW
AFTER THREE TIMES FRO. OTHER COMPANIES THIS ONE GOT IT RIGHT. PRAISE THE LORD.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.1 / 5.0, 6 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The burners inside the oven would not light
Pulled Oven from wall, disconnected gas and electric, removed bottom drawer, laid oven on its back, removed dual outlet valve ( tight space to loosen fittings, had to remove burner in oven to replace valve.) installed new valve, put teflon tape on all screw joints and tightened, Removed old Oven igniter and installed new igniter while bur
... Read morener was removed during the step above, reconnected all wires, connected gas, plugged in oven, pushed back into place, releveled range, Oven works great. Time does not include cleaning of range and area underneath, repainting the range top. I cleaned the range top burners also and they light much quicker now
Pulled stove away from wall to access gas valve in rear. Adjusted the jet on the replacement valve for LP gas and connected the four control wires. Two open end wrenches and one stubby phillips screwdriver were all that was needed.
Larry from Montgomery, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
1 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not heat but Broiler would
Turn off the gas supply and unplug the power cord. Remove the screw on the back plate for the metal tab that covers the valve. Bend the tab up to expose the valve. Remove the gas line that feeds the broiler with an adjustable wrench. Remove the mounting screw for the valve. Loosen the valve inlet gas line fitting with an adjustable wr
... Read moreench. Lift the valve out. Reverse the steps to install the new valve.
Read less
Robert from Hudson, OH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)
8 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wouldn't heat, broiler would.
Removed all screws from back panel of stove, disconnected all electrical, shut off gas. Removed valve and replaced with new. Put all back together. Turned on gas and checked for leaks. Success!!
Pati from Marietta, GA
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set
2 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
igniter would light----gas valve would NOT open
SHUT OFF GAS disconnect FLEX LINE from gas PIPE remove GAS pipe from rear of stove remove rear panel remove pre-shaped gas lines to burners and oven / broiler separate dual control valve from pressure regulator disconnect wiring from dual control valve REASSEMBLE in OPPOSITE order turn on gas
... Read more />CHECK ALL FITTINGS FOR POSSIBLE LEAKS Turn on each BURNER - making sure EACH one lites turn on oven - making sure that the OVEN igniter lites the OVEN set control on BROIL turn on broiler - making sure that the BROILER igniter lites the BROILER
Read less
Robert from SALEM, IL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)
21 of 28 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not heat but broiler would.
By undoing the bottom of the stoves back panel, you are able to remove the two knock outs and ben the panel up for complete access. Remove gas line and electrical connection (with stove unplugged and main gas valve turned off). Undo the mounting screws and replace unit following steps in revcerse.
Edward from Sewickley, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)
37 of 43 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
German
August 9, 2019
Hello,my broil works fine, but the lower Flame does not turn on all the time, and it take too long to release the gas. The Flame is small and sometimes it turns of leaving a gas smell.What part do i need to replace ?
For model number PGR5715BDW
Hello German, thank you for your question. It sounds like the igniter is not drawing enough voltage to open the gas valve all the time. We would recommend replacing the igniter. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
William
January 14, 2020
My igniter in the lower part of oven was not working. I replaced it and now the broiler igniter and lower igniter will not work. Is there a fuse to either of them?
For model number 3468XVA
Hi William,
Thank you for your question. There is not fuse listed, but if the oven is not heating or turning on, there are some parts that you will need to check to see which one is causing the issue. You will need to check the dual outlet oven safety valve, the oven sensor and the gas pressure requlator. We hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
John
March 13, 2020
Oven stopped working, broiler works as does stove top
For model number MGR5729ADW
Hello Joh, thank you for writing. There are a few parts we advise testing with a Multi Meter when this issue occurs. Those would be the Oven Sensor, the Element, and the Ignitor. I hope this helps.
Was this helpful?
Thank you for voting!
ROBERT
September 11, 2019
Bought your flat style oven igniter ,which solved the oven not starting and the smell of gas. But now we seem to have an issue with the timming to get the oven up to 350 it took 40 minutes to reach 350..is there a voltage problem with the igniter or duel valve ? oven heated using the broiler to 340 in about 10 minutes,if that helps.thanks
For model number N3478VVV
Hi Robert, I would recommend the oven igniter kit 12400035 . As you said the Broiler heats in 10 minutes so it is likely not a voltage issue. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Rodger
December 8, 2019
Hello,my broil works fine, but the lower Flame does not turn on all the time, and it take too long to release the gas. The Flame is small and sometimes it turns of leaving a gas smell.What part do I need to replace ? For model number cgr3765adc
For model number cgr3765adc
Hi Rodger, if it is leaving a gas smell I would recommend a professional technician take a look. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Rick
January 24, 2018
The dual oven safety switch in my range is part 7501p195-60 and your site says that the part shown cross references with part 7501p097-60. What switch is for my range?
For model number MGR5770BDW
Hi Rick,
Thank you for your question. The part number listed for the dual oven safety valve listed under your model number is PS11744133, Whirlpool's part number WP74006427. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
