Sold individually.
This dishrack adjuster is for dishwashers.
Dishrack adjuster lets you change the height of the dishwasher's upper rack.
Wear work gloves to protect your hands when installing this part.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your KitchenAid Dishwasher Dishwasher Dishrack Adjuster
Troubleshooting
This part fixes the following symptoms:
Door latch failure | Door won’t close
This part works with the following products:
Dishwasher.
Part# WPW10195839 replaces these:
AP6016799, W10195839
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
3.0
Filter By Rating:
5 Stars
1
4 Stars
1
3 Stars
0
2 Stars
1
1 Star
1
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Heather C - July 31, 2021
Verified Purchase
easy repair
did not come very fast
★★★★★
★★★★★
Timothy R - September 3, 2019
Verified Purchase
Easy repair
The part was different from the original part but it works just the same. No complaints
★★★★★
★★★★★
James S - July 11, 2018
Verified Purchase
wasnt the right part
The diagram is hard to figure out the part so I will just end up getting a repair person out.
★★★★★
★★★★★
Patricha K - April 24, 2018
Verified Purchase
returned part
Received the wrong part so returned it to partselect. I thought I was ordering a kit not a single part. Ordering site is very confusing because it said it was the adjust kit but I got one single plastic piece .
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
upper rack support broke
parts were an exact fix to my problem the on line video was perfect repair was done in under 30 min thanks keith bluffdale, utah
My upper rack, even after replacing the upper rack tracks, would pivots forward or backward out of the horizontal.
It was easy to remove the old parts by using a screwdriver to push in “tabs” that kept retainer clips in place. Once removed, it was a matter of easy assembly in reverse and then re-clip. It became clear that the problem was because a few tabs that click into the sliding track and worn to the point where they no longer retained a tight co
... Read morennection to the track causing the upper rack to tilt with weight to front or back. Sure, the parts are a bit pricey but not when compared to a repair visit or a new KitchenAid which otherwise was functioning perfectly.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
9 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
MARK
February 23, 2020
I need part number 4 in the diagram. Is this part sold individually or only as part if the kit?
For model number WDTA50SAHZ0
Hello, Thank you for your question. Part# PS10065979 is the part you are referring to. That is only sold as a set of both the left and right pieces. We hope this helps.
11 people found this helpful.
Was this helpful?
Thank you for voting!
Derek
January 26, 2018
Hello, my top rack of my dishwasher broke on one side. It seems that the white clip can't fasten into the #2 part of the diagram. Can i just replace the #2 part? What is that called?
For model number 665.13263K113
Hello Derek, Thank you for your inquiry. That part comes as part of the rack adjustor kit-white wheels part# W10712395. It has the parts for both the left and right hand sides to make up the adjustor assemblies. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Fnfoto
January 2, 2020
Need part 4 (?) of the diagram for wdta50sahz upper dish rack as the part that holds the wheel is broken. Please advise the proper part(s) number. Thank you.
For model number WDTA50SAHZ
Hello Fnfoto, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS10065979. Hope this helps!
What rack adjuster fits ,model no.665.14693n412 .Kenmore dishwasher
For model number 665.13693N412
Hello George and thanks for writing.
Rack adjuster Part Number: PS11750092 is in the list of compatible items for your model. We hope this helps. Please contact us anytime.
Was this helpful?
Thank you for voting!
Scott
December 10, 2019
I am looking for the replacement part number or and equivalent part number that will work. My part # w10350374 adj arm broke, it had fingers that kept the wheel attached. The wheel that attaches to this adjuster arm is 1.25” diameter. I can not seem to find a part# or a replacement part. Please help me with a part and where i could order something like this. Thank you for your help! Scott
For model number WDTA50SAHZ0
Hello Scott, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS10065979. Hope this helps!
On your site for parts...you don't have section 10 part #4. which is where i am assuming the whole wheel for the top rack left side part is?
For model number WDTA50SAHZ0
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is ishwasher Rack Adjuster Kit (Part# PS10065979)
Someone put someone put a wooden dowel across both left and right wheel to hold the dishwasher from tipping forward I need the actual parts and maybe pics also really use help
For model number WTD750Sahwo
Hi Ken,
Thank you for your question. We have researched this for you and the part number listed under your model number for the leveling leg is PS557020. If you have any questions, please let us know. We look forward to hearing from you!
