Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This lower oven bake element is a genuine replacement component designed to deliver consistent heat from the bottom of the oven cavity. Engineered for select models from Whirlpool, KitchenAid, Maytag, and Amana, it converts electrical energy into radiant heat to ensure uniform baking performance. Constructed from durable materials, it offers reliable heat transfer and long-term resilience under high-temperature conditions. Replacement is recommended when the oven fails to heat properly, produces uneven results, or shows visible signs of damage such as burning or breakage. Installation should be performed with the appliance unplugged, and model compatibility must be verified prior to purchase.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Robert K - February 29, 2020
Verified Purchase
simple
An easy repair to do. Took only about 15 minutes and the part fit perfect. Only been used a few times but works like new.
★★★★★
★★★★★
Jennifer R - December 26, 2019
Verified Purchase
Fit Right In!
It was the exact right part for our oven. We were worried it was going to be a bigger electric problem, but it turned out that the bottom element we had had almost completely disintegrated in the oven.
Thanks for having these parts accessible so we didn't have to completely replace the oven!
★★★★★
★★★★★
John M - November 13, 2021
Verified Purchase
Easy fix
Element worked great. Happy with replacement.
★★★★★
★★★★★
Dawn F - January 15, 2023
Verified Purchase
Arrived fast and worked as expected
Very happy with the ordering and shipping process - 1 week before Xmas I needed my oven for baking - extremely satisfied with your service - I will be spreading the word of your existence
★★★★★
★★★★★
John B - June 24, 2019
Verified Purchase
all went well, give it 5 stars
stove works like it did before
★★★★★
★★★★★
Noah B - July 24, 2020
Verified Purchase
Repair went well
Appliance working like it should. Online help very helpful. Excellent business model
★★★★★
★★★★★
ELAINE P - July 23, 2020
Verified Purchase
Bake Element repair
Really fast service, repaired part worked perfect oven like new know
★★★★★
★★★★★
Jeffrey N - June 2, 2018
Verified Purchase
Easy repair
Fasr delivery!
★★★★★
★★★★★
Christian S - May 18, 2018
Verified Purchase
Works like a charm
Arrived on time; accurate description; works well. What else could you ask for?
★★★★★
★★★★★
Donna V - June 29, 2018
Verified Purchase
easy to instal.
Came in the expected time in good shape
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 27 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Bake element burnt out
After removing element cover off with Phillips screw driver, found a little screw in bottom of oven. Couldn't find where that came from. Removed two screws from element bracket from floor of oven and one holding in the back wall. Most difficult was pulling the old element out of the electrical clamps and hoping the wire would not pop bac
... Read morek into the insulation/ and replacing with the new bracket. That is where my hemostat came handy as pliers were too big and the hemostats stabilized the connection without it popping back into the oven. What was really astonishing was the new element and floor bracket DID NOT line up with the screw holes in the bottom of the oven. Could not adjust/move bracket as some of the element was "clawed?" on the bracket and feared I would damage it. Thus I now have two extra screws along with the one found on floor of the oven. Replaced cover and it currently heats nicely.
Read less
Carol from QUAKERTOWN, PA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wouldn't heat past 165 degrees
First things first...Unplug the unit...Then remove the center plate from the back of the oven (one screw) and take clips off element. Then on the inside, there are 2 screws near the back on the bottom panel. These were rusted on pretty good, so that's where the vice grips came into play. The entire job would've gone much faster, if I wasn
... Read more't fighting with these 2 screws...After you remove the screws, tilt up bottom panel and remove. Then you just remove 1 rear screw & 2 bottom screws and slide out the old element. Slide the new one in, secure it with the screws and screw the bottom panel back into place. Go to the rear of the oven, slide the 2 clips on the element and screw rear plate back on. Plug the oven back in and that's it...
Read less
Joe from BOYNTON BEACH, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken bake element
removed bottom pan cover. removed broken element. replaced with new one.. simple. would buy from this place again. shipped super fast
sandra from ROCHESTER, MN
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven was not heating correctly
i simply followed your instructions,so easy my wife could have done it with her pink screwdriver!!! thanks for your help.
james from burlington, KY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heating element not working
Ordered the part late Wednesday night and paid for standard shipping. The part arrived Saturday morning, we removed the old part and screwed in the new one. It took minutes! We were shocked at how inexpensive the part was, how user friendly this site is and how quick the order arrived. We will def use this site again!
Renee from Charlton city, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
blown heater element
Pull oven away from wall and unplug. with the oven door open, remove 2 rear screws holding down the element cover and pull element cover out of the oven. remove 2 screws holding element down to the bottom of the stove, and one screw holding the back of the element to the rear. now go behind the oven and remove the access plate to the ele
... Read morement power connection (one screw). Disconnect the 2 element power wires. remove element. to install, reverse these instructions
Read less
mark from otsego, MN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
We Heard A Pop Saw A Flash And The Bottom Element Didn't Work
The first time is always the hardest. I took out the bottom cover that had 2 screws saw the broken element took out 3 screws to the emement. I then pulled out the stove unpluged it from the wall and took off the back panels several screws and found the element connected to the wires I marked the wires left & right and disconected them.
... Read moreI reversed proceedure to install the new element. The oven still won't go over 250 degrees I think when the element blew it to the circuit board with it.
Read less
Norman from Brockton, MA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven would not heat over 190 degrees.
Went to this site and read what a few others had done to fix their problem. Found the model number and ordered part. It was on our steps in less than 3 days. It took less than half an hour to replace and put back together. Just had my first meal from "NEW" oven. Great site, great price and great service!
Thanks!
Timothy from Hamilton, OH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven tempature would not exceed 165 degrees.
Purchased new bake element from PartsSelect. Very easy to install, unplug range, remove 6 screws, slide element out and unplug end, remove old element. Reverse procedure to install new element. My range was about 6 years old and in excellent condition, was considering buying a new range. Found PartsSelect on-line and ordered new element.
... Read moreTheir website is very easy to use and find correct parts. Saved lots of dollars, this PartsSelect website and service is great.
Read less
Michael from Torrington, CT
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven not heating above 325 deg.
remove stove , unplug power , took back panel off, disconnected wiring to the heating element, from the inside of the stove removed bottom plate /two screws/, removed heating element /two screws/. installed new element .put other parts in order they were removed
maciej from Pensacola, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
12 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
SAADIA
March 7, 2019
What bottom oven range will work with my oven?
For model number MER5765RAS
Hello Saadia, thank you for your question. The bake element for your unit is PartSelect Number: PS11751723. Please enter the part number into the site for current price and availability. Good luck with your repair!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Samantha
December 19, 2019
I am in need of a bottom bake element for my Whirlpool oven. Ztsm 240v 3600w l360at are the numbers on my broken element.
For model number YWEE730H0DS0
Hi Samantha,
Thank you for your question. The part number listed under your model number for the bake element is PS11703285. We hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Teresa
January 13, 2020
Oven temperature 75 to 100 degrees hotter than setting. I replaced the long oven sensor and did not fix the problem. Anything else i can try?
For model number JER8885QAS
Hello Teresa and thank you for writing.
It certainly sounds like it could be a faulty infinite switch PS11744486 and/or faulty bake element, you should check for signs of damage, and replace if necessary. We hope this helps. Please contact us anytime if you require further assistance.
What heating element would i need for my model?Thank you,
nick
For model number MERS755RAW
Hello Nick, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: PS11744252 for the top broil element and Part Number: PS11751723 for the bottom bake element. Hope this helps, good luck with this repair!
What part number will work for this model, bottom oven heating element? Thanks
For model number Mer577qas
Hi Julie, I am assuming you are referring to a model MER5775QAS. The bottom element is bake element part number PS11751723. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Mercer
April 8, 2019
Part number upper element that broils.
For model number KERS205TSS0
Hello Mercer, thank you for contacting us. The Broil Element for your model is part PS11744522.
Was this helpful?
Thank you for voting!
Melody
September 10, 2019
Hi, what is the baking element for model aer5715rcs? Thanks!
For model number AER5715RCS
Hi Melody, the correct baking element for model AER5715RCS is WPW10276482. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Janet
October 14, 2019
I am looking to replace the oven element. The one i’ve found that looks like the one i have, wpw10276482, states that it is for the bottom of the oven. My element is at the top. Will this be appropriate? Maytag self cleaning True convection range. Thanks
For model number YMER8875WW
Hello Janet, thank you for inquiring. The top element is the Broil Element. The replacement for your model is part number PS11744522. Good luck with your repair!
Was this helpful?
Thank you for voting!
Dan
April 15, 2018
What baking element do I need?
For model number MER5775RAB
Hello Dan,
Thanks for your question. The bake element you will need is part number PS11751723.
I hope this helps.
Was this helpful?
Thank you for voting!
Jay
August 2, 2018
I have Amana aer5845qas electric stove, cooktop everything is working fine. However, when oven is set to bake, it will beep once and stops, no heat. I tested the temperature sensor and the heating element with multi meter, both appear to be fine with the proper resistance. What else could be wrong? Thank you.
For model number AER5845QAS
Hi Jay,
Thank you for your question. If you have tested both the electronic control board and the oven sensor, that are some other parts that you will need to check to see which ones are causing the issue. You will also need to check the bake element, the terminal block and the wiring between the parts to verify what is causing the issue. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Range","title":"Range","url":"/Range-Parts.htm"},{"position":2,"name":"Element or Burner","title":"Element or Burner","url":"/Range-Elements-and-Burners.htm"},{"position":3,"name":"WPW10276482","title":"WPW10276482","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
