This pump inlet grommet is a genuine OEM replacement part that is compatible with various models of dishwashers. It is made of rubber and has a diameter of approximately 2.5 inches. The grommet is used to create a watertight seal in the area between the inlet hose and the circulation pump. This prevents the dishwasher from leaking, and it also helps to absorb minor shocks and vibrations that occur while the dishwasher is running. It is normal for the grommet to wear down over time or become damaged from exposure to water, heat, and chemicals.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Hood E - October 27, 2022
Verified Purchase
Fixed the problem.
There was a bad leak under the dishwasher. This grommet fixed the problem.
★★★★★
★★★★★
RICHARD V - February 5, 2021
Verified Purchase
Part fit prefect, fast delivery.
Part work great, still working on dishwasher. This part stop leak.
★★★★★
★★★★★
Jerriallen - June 8, 2018
Verified Purchase
Simple repair
My dishwasher is back working like new. This is a soft rubber part that was easy to install. I got it in a short amount of time & had it installed in under an hour.
★★★★★
★★★★★
Robert S - May 16, 2018
Verified Purchase
Part Recieved As Ordered
First time ordering from PartSelect. Part came in a couple of days and fit perfectly. Will order from PartSelect again.
★★★★★
★★★★★
Fred H - March 20, 2018
Verified Purchase
Easy repair
The part came in as expected and was easy to put on. The dish washer works great.
★★★★★
★★★★★
Randy M - February 27, 2018
Verified Purchase
Wrong part, can not use it, have to ship it back.
Not the part that I needed, next time will double check part number with the person on the other end of the phone..
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.3 / 5.0, 4 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
I damaged the grommet when removing the recirc pump
repair went smooth for the grommet. suggest a small of vasoline to ease installation of grommet
john from SANFORD, NC
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
WARNING!!! This is NOT the grommet that goes on the "pump stem" in the center
I purchased this misguided by the official response to "Doug" on April 17, 2018, which at the time was labeled as "most helpful". This is NOT the little grommet in the center. This is a big grommet that goes no the supply pump. This is #14 in the diagram. (#15 is actually the clamp that holds it). If you are looking for the little grommet
... Read more that goes on that stem on the central recirculation pump, that part is not available, it only comes fused on the sump, and for replacing the sump you have to disassemble the whole bottom part of the dishwasher, pumps, sensors, valves, hose...even this big grommet. A lot of work, and since you are at it, you might want to replace both grommets. If you need THIS big grommet (#14) only, then it is not so much work, just take out one clamp, one connected cable, and the grommet to replace. But check if your machine has reusable clamps, because if not, you might want to order a new clamp. Good luck!
Read less
Monica from PITTSFORD, NY
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
16 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Develeoped a leak on the bottom.
Pulled dishwasher out of compartment, removed all parts underneath. removed inner parts, removed pump assembly. Installed new pump assembly and grommet. Reassembled in reverse order, test ran and unit was operating normal and no leaks.
Eladio from LOGAN, OH
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)
3 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishes not coming clean
Replace motor-pump. All was as advertised plus the surprise of included outlet hose. I didn't have the tool to operate the clamp, it leaked, so I replaced it with a stainless worm gear type.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Doug
April 17, 2018
Pump picture for Kenmore .. #15 is this the rubber gasket that wraps the pump stem going up to the tub under the bottom arm that turns in dishwasher
For model number 66513269k114
Hi Doug, Thank you for the question. Yes, this grommet will be the seal you need. Good luck with the repair!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Abdalla
July 31, 2019
I have a KitchenAid dishwasher that has a problem leaking from the sump. The technician told me that the seal is not available in the market anymore and that now its sold together with the sump. The model number of my KitchenAid dishwasher is KUDE48FXSS5. Would part number WPW10538166 solve my issue by replacing the current seal I have only without having to get a new sump as well?
For model number KUDE48FXSS5
Hi Abdalla,
Thank you for your question. If the dishwasher is leaking from the area of the sump, then this grommet may solve this issue. If not not you may need to replace the sump. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Laura
February 12, 2023
I have Kenmore dishwasher Model # 665.13269K114. It is leaking on the bottom from the diverter motor, was told it may be the diverter motor pump grommet seal but not sure what part # this is.
For model number Kenmore 665.13269K114
Hello Laura, thank you for contacting us. Yes, the issue might be caused by a worn-out pump grommet, part number PS11756098. It seals the circulation pump inlet to the sump and helps in preventing water leaks. We would also recommend checking the diverter motor, part number PS5136127. A damaged motor can also cause a water-leaking problem. We hope this sorts out your problem!
I need to replace the diverter seal grommet on my Whirlpool dishwasher. What is the part number I need for my model?
For model number WDT750SAHZ0
Hello Mel, thank you for the question. According to our research, the compatible pump grommet for your model is part number PS11756098. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Hans
August 8, 2023
Need to replace my diverted grommet seal. What seals work?
For model number Kdfe454css0
Hi Hans, thank you for your inquiry. According to our research, the compatible pump grommet for your model is part number PS11756098. We hope this information helps!
Was this helpful?
Thank you for voting!
Christine
February 13, 2023
Leaking from bottom of door. Have replaced door gasket seal. Still leaking early in cycle and new seal seems to make door close harder. Suggestions?
For model number Wdf540padw3
Hi Christine, thank you for reaching out. Verify that the door seal is aligned properly. Make sure your dishwasher is level. Check the door latch, part number PS11756967, and make sure that it is aligned properly. Verify that the striker plate, part number PS11756123, has no irregular bends or clogs. Remove the water nozzle and water inlet valve, part number PS12578165, and make sure to clean the opening of the nozzles. Look for clogs in the spray arms, filter assembly, and drain hose. Make sure that the hose has a high enough loop or is connected to an air gap. Also, test the drain pump, part number PS11738151, and verify that the impeller, motor, and solenoid are working correctly. Replace the drain pump assembly if it is damaged. We hope this solves your problem!
Black rubber particles on dishes. Near the sump look like tub grommet rubber particles are in the non drained water. Will a new grommet fix the problem or could the particles be from the door seal?
For model number WDF760SADT0
Hello Jay, Thank you for the question. if the Grommet shows signs of wear, it will need to be replaced. You can also check the seal, it should show visible damage or wear. We hope this helps!
